Components and supplies
Arduino Mega 2560
8-Channel Relay Module
Female/Female Jumper Wires
Tools and machines
3D Printer (generic)
Project description
Code
Downloadable files
Wire diagram
These are the connections for each component in the project. Original file is located here: https://github.com/CodeMakesItGo/FireWorkController2021
Wire diagram
Wire diagram
These are the connections for each component in the project. Original file is located here: https://github.com/CodeMakesItGo/FireWorkController2021
Wire diagram
Documentation
Extra sensor mount without a gap.
Extra mounting location if needed. I used this to mount the remote module.
Extra sensor mount without a gap.
Micro Mount
This is a support for mounting the Mega Mount. Connects to the platform base in the center of the two upper relay mounts.
Micro Mount
Firework Controller Base
The is the base platform.
Firework Controller Base
Relay Brace
This will hold down the relay module. You will need 6 of these because the bottom layer uses two per relay module.
Relay Brace
Mega Mount
This is the platform to hold the Arduino Mega. It will attach to the Micro Mount.
Mega Mount
Relay Mount
You will need to print 2 of these.
Relay Mount
Hat
This is the firework controller helmet.
Hat
Mega Mount
This is the platform to hold the Arduino Mega. It will attach to the Micro Mount.
Mega Mount
Extra sensor mount without a gap.
Extra mounting location if needed. I used this to mount the remote module.
Extra sensor mount without a gap.
Relay Mount
You will need to print 2 of these.
Relay Mount
Relay Brace
This will hold down the relay module. You will need 6 of these because the bottom layer uses two per relay module.
Relay Brace
Micro Mount
This is a support for mounting the Mega Mount. Connects to the platform base in the center of the two upper relay mounts.
Micro Mount
Firework Controller Base
The is the base platform.
Firework Controller Base
Hat
This is the firework controller helmet.
Hat
Sensor Mount with Gap
Additional mounting location if needed. I used this to mount the FET relay module.
Sensor Mount with Gap
Comments
Only logged in users can leave comments
codemakesitgo
0 Followers
•0 Projects
Table of contents
Intro
6
0