Public projects 1

Home Automation using Raspberry Pi 2 (Windows 10 IoT Core)

Project tutorial by Christian Kratky

  • 139,522 views
  • 34 comments
  • 443 respects

Toolbox 3


Home Smart Home

Project tutorial by Syed Sanoor

  • 82,461 views
  • 11 comments
  • 216 respects

DHT11 /DHT22 Temperature Sensor

Project tutorial by Daniel Porrey

  • 94,778 views
  • 106 comments
  • 144 respects

Physical Home Automation Interface

Project tutorial by Eric Tsai

  • 15,197 views
  • 4 comments
  • 35 respects

  • Home Automation using Raspberry Pi 2 (Windows 10 IoT Core) over 3 years ago

    Thanks :-) If there are any problems with the code, architecture etc. just contact me. I will support you.
    Regards
    Christian

  • Home Automation using Raspberry Pi 2 (Windows 10 IoT Core) over 3 years ago

    Well this project is at a high level and includes wrapper for the boards from CCTools. It is designed to be extensible which means you are able to integrate sensors and actuators which are using AllJoi
    yn or other protocols like HTTP, MQTT etc. The benefit of this project is to deal with all of that different hardware and combine them to a fully featured home automation solution. So think you should start with AllJoyn and then thinking about how to integrate the sensor and actuators into this SDK. You can still send me private messages if you need further information or help.

  • Home Automation using Raspberry Pi 2 (Windows 10 IoT Core) over 3 years ago

    Hi Lucas.
    Yes the communication is done over the I2C bus and the Arduino. The protocol is implemented at the "Firmware" for the Arduino which is called "I2CHardwareBridge" within the solution. The C# part at the Pi2 contains a wrapper for remote controlling of the Arduino.

Add projectSign up / Login