Create your own code red button for use in simulation scenarios. Flashing LEDs and button!
Project tutorial by David Escobar
Set an alarm with MKR1000 and MKR Relay Proto Shield to turn a lamp on/off.
Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!
Read temperature and humidity values in a remote location and store the data in an SD card.
Project tutorial by Arduino_Genuino
See how much battery you have left!
Project showcase by Arduino_Genuino
I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.
Project showcase by Zorzonel Vlad
Apologies Terrance. The code is used for the flashing of the LEDs through the Arduino board.
Hi Terrance, im not too sure what your asking? if you mean why create this device, in healthcare simulation training centers Code Red and Blue buttons cannot be used or do not exist. this is a workaround, Also this just provides another example of how-to for users
Thanks for the comment, let me work on getting some detailed photos. The force sensor is placed under the outer chest skin, directly below the hand placement for CPR. used 3M tape to keep it in position.
Or connect with your social account:
New here? Create an account