Public projects 1

Battery Charger Monitor

Project tutorial by David Kanceruk

  • 4,882 views
  • 1 comment
  • 22 respects

Toolbox 2


Respected projects 3

Micro Soldering Station

Project tutorial by Paulo Bruckmann

  • 17,498 views
  • 15 comments
  • 51 respects

Battery Charger Monitor

Project tutorial by David Kanceruk

  • 4,882 views
  • 1 comment
  • 22 respects

Smartap Future of Faucets

Project tutorial by Ferdinand Thomas

  • 1,648 views
  • 1 comment
  • 9 respects

Comments 2

  • DIY Multimeter about 1 year ago

    This project has a number of issues, the first of which is the schematic. It shows a 5.5K resistor, a diode and a capacitor. These did not appear in the parts list as of August 18, 2018.
    The schematic also shows that the diode is shorted and both sides are connected to the Arduino A0 input. The schematic does not show where the bottom of the voltage divider connects to ground.
    It also indicates the measured voltage can be AC or DC. The capacitor would make it impossible to measure DC voltage (if the other problems with the schematic were corrected.
    The values for R1 and R2 in the code bear no resemblance to the resistors in the schematic.

  • Micro Soldering Station about 1 year ago

    The schematic drawn with EasyEDA has an error. SCLK to the LCD is shown as coming from GND on the UNO.

Add projectSign up / Login