Use an Arduino MKR1000 to maintain a constant temperature in a charcoal smoker and allow monitoring over Wifi,
Project tutorial by Team Up in Smoke
Tthis project is going to show you how to make Bluetooth led control with lcd beside the Arduino sowing the new led status.
Project tutorial by Youssef Sabaa
Restores your Wi-Fi connection for you, so you don't have to, and keeps a track of how often this is done.
Project tutorial by Khalid Abdulla
If the WiFi connectivity goes down, this will reboot the router.
Project tutorial by Sameer
HI, The breadbord in the picture actually was the complete circuit. The extra wires come from the three thermistor circuits wired into the circuit (one simulated using variable resistor seen on the right end of the breadboard) The actual circuit is fairly simple, a voltage divider for each thermister and the breakout board for the MosFet.
I never got much past the breadboard, I cross wired the battery moving it to a more permanent board and blew out the Arduino,
Or connect with your social account:
New here? Create an account