Arduino Project Hub

RF BASED SMART HOME AUTOMATION SYSTEM © GPL3+

The main objective of this project is to develop a smart home automation system with a button key fob transmitter by using RF.

  • 16,186 views
  • 2 comments
  • 32 respects

Components and supplies

Necessary tools and machines

09507 01
Soldering iron (generic)

Apps and online services

About this project

The main objective of this project is to develop a smart  home automation system with a four button key fob transmitter by using RF (Radio Frequency) technology.

Nowadays, houses are gradually shifting from normal switches to centralized control system, involving a remote control transmitter. This technology is not only easy to use but also helps to prevent missuses of energy. Remote control (key fob) transmitter is small and very light weight, which will work from a decent distance.

It helps elderly people to control switches from anywhere up to 75 feet. This four button key fob transmitter is also very productive for commercial uses in Industrial and medical systems. Remote controlled home automation system provides a simpler solution with RF technology.

In order to achieve this, a RF remote(Keyfob) is interfaced to the microcontroller on transmitter side which sends ON/OFF commands to the receiver where loads are connected. By operating the specified remote switch on the transmitter, the loads can be turned ON/OFF remotely through wireless technology.

Arduino IDE software has been used to compile some programs related to the micro controller ATmega328. (Arduino Uno R3)



Schematics

Schematic diagram
Was designed using proteus

Code

Arduino uno project code for rf based home automation system
Itshows communication between the RF Transmitter and the RF receiver and the display on the LCD .Arduino Uno R3 was used.

Comments

Similar projects you might like

Voice-Controlled Locking Device

Project tutorial by 4D Makers

  • 755 views
  • 1 comment
  • 7 respects

J.A.R.V.I.S. : A Virtual Home Assistant

Project tutorial by Team Blitzkrieg

  • 6,227 views
  • 1 comment
  • 81 respects

Inexpensive Wireless Interactive Board

Project tutorial by Adellar Irankunda

  • 9,411 views
  • 4 comments
  • 15 respects

PrankChair THE BEST ARRIL FOOLS PRANK!

Project tutorial by Siddhant Choyal

  • 279 views
  • 0 comments
  • 3 respects

DIY Code Red Button for Healthcare Simulation

Project tutorial by David Escobar

  • 931 views
  • 0 comments
  • 2 respects

Biomed Shield for Arduino 101 Powered By Intel

Project in progress by Orlando Hoilett

  • 5,379 views
  • 3 comments
  • 17 respects
Add projectSign up / Login