DipUno

Project showcase by zhaoshentech

  • 246 views
  • 4 comments
  • 6 respects

IoT4Car (2)

Project showcase by zhaoshentech

  • 7,942 views
  • 21 comments
  • 65 respects

LCD1602MkrUnoShield

by zhaoshentech

  • 1,231 views
  • 0 comments
  • 4 respects


Replicated projects 0

 zhaoshentech hasn't replicated any projects yet.

Intellisaurus - Dinosaur Robot Kit

Project in progress by Jacquin Buchanan

  • 8,080 views
  • 7 comments
  • 119 respects

ATmega Alien Themed Slot Machine

Project tutorial by Dan Murphy

  • 1,204 views
  • 6 comments
  • 14 respects

Arduinoflake!

Project tutorial by Jiří Praus

  • 7,919 views
  • 27 comments
  • 137 respects

  • DipUno about 2 months ago

    Yes, it is a bit high. I think it is because I purchased all the components in small amount. If purchasing them in bulk, it may reducing the cost per component. The cost also includes shipping fee. So purchasing in bulk will divide the shipping cost a lot.

    Because the minimum PCB amount is 3 pieces if using OSHpark, so I place the order of 3 times the required components. When receiving the boards and the components, I can build three boards. If want to build more, I have to place the order to OSHpark and digikey again.

    Hope it helps.

  • DipUno about 2 months ago

    It's about 20 bucks a board. The PCB is about 10 bucks, the rest components takes about another 10 bucks. Hope it helps.

  • IoT4Car 2 months ago

    Hi Syd,

    I don't have an oscilloscope to capture the waveforms, thus cannot provide the data. You can try a OBD emulator. I think you can purchase them on the market. Hope it helps.

Add projectSign up / Login