Project tutorial

HID Attack Over WiFi Using Arduino MKR1000 © GPL3+

Arduino MKR1000 as a HID, for performing HID penetration testing over WiFi networks.

  • 4,658 views
  • 1 comment
  • 15 respects

Components and supplies

About this project

Today I have an Arduino MKR1000 which is a board with built-in wifi chipset specially designed for IOT projects. Recently I came to know that, this little board can act as a Human Interface Device such as a keyboard or a mouse. So I thought of using it for some HID attacks over WiFi.

In this video, I will show you a small demo of some basic attacks. Click the subscribe button down this video.

Demo Video - Subscribe for more

Here, the board is programmed in such a way that, whenever I power it up, it will connect to my mobile phones WiFi network and starts a web server at port 80, which can be accessed from any web browser in my phone.

So what I can do is connect this board to my victim PCs back USB port and walk away so that the victim wont be suspicious. Now I can open up a browser, go to MKR1000 board's IP address and wait for the victim to walk away from his computer. When he is away from the computer, if the PC is not locked, we can easily do HID attacks remotely.

One advantage of this is we can store multiple commands in this baord and we can issue one by one from our phone whenever we want. Which means, we can use this same for multiple devices without uploading the code each time for each purposes.

How To Do It?

 Video Tutorial

Tutorial - Subscribe for more

Download, Install and Setup Arduino IDE

First thing to do is download and install Arduino IDE from Here.

Once you install it, now its time to add Arduino MKR1000 board to the board manager.

Then you have to install WiFi101 library from the library manager.

Download the Code

The code is available in the github. You can download it from Here.

This was written as experimental code and it is not well written. I have plans to update the code with support for other OS and more complicated attacks in the future.

Editing the Code

Now all you have to do is do some basic modifications in the downloaded code. Just change the ESSID and Password.

Now connect the board and upload the code to your board.

And thats it. Happy Hacking

You will find more fun arduino projects in arduino, raspberry pi and Penetration Testing in my Youtube Channel

You will find full Instructions in my Blog - www.greenterminal.in

Code

Github
https://github.com/greenterminal/ducky_over_wifi.git

Comments

Similar projects you might like

DIY Magnetic Table Hockey With RGB Lights and Sensors

Project tutorial by evive

  • 125 views
  • 0 comments
  • 8 respects

Pac-Man LED Pixel Panel Costume

Project tutorial by Ben Muller

  • 6,030 views
  • 5 comments
  • 99 respects

Climate Cube for Greenhouse

Project in progress by Istvan Sipka

  • 1,410 views
  • 0 comments
  • 13 respects

LoRa Gateway for DeviceHive

Project tutorial by DeviceHive IoT team

  • 1,564 views
  • 2 comments
  • 19 respects

IoT Bird Feeder with Sigfox and Tweeter

Project showcase by Gaël Porté

  • 700 views
  • 0 comments
  • 9 respects
Add projectSign up / Login