Public projects 5

See all of Jeremy Lindsay's public projects
Calibrating My Servos

All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.

Calibrating My Servos

Project tutorial by Jeremy Lindsay

  • 20,078 views
  • 11 comments
  • 85 respects
A Model Lighthouse Using an Adafruit NeoPixel Ring

A model lighthouse, built with 3D printing, using an Adafruit NeoPixel Ring for the lights.

A Model Lighthouse Using an Adafruit NeoPixel Ring

Project tutorial by Jeremy Lindsay

  • 1,273 views
  • 2 comments
  • 8 respects
See Colors with the Adafruit TCS34725, an Arduino and a Pi 3

This toy project uses the TCS34725 to read the color of Lego bricks, and uses a Raspberry Pi UWP C# application to say the color.

See Colors with the Adafruit TCS34725, an Arduino and a Pi 3

Project showcase by Jeremy Lindsay

  • 3,032 views
  • 0 comments
  • 6 respects

Toolbox 3

Ide web
The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. It runs on Windows, Mac OS X, and Linux.

Arduino IDE

Ard nano
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328.

Arduino Nano R3

A000066 iso both
Your entry to the unique Arduino experience: from the basics of electronics to rapid prototyping.

Arduino UNO & Genuino UNO

Replicated projects 0

 Jeremy Lindsay hasn't replicated any projects yet.

Respected projects 0

 Jeremy Lindsay hasn't respected any projects yet.

Comments 2

  • Calibrating My Servos over 1 year ago

    Thank you! It's so nice to get this encouragement - I really appreciate it!

  • Calibrating My Servos over 1 year ago

    Attaching a potentiometer to the servo wiper is a great idea, I really like it - I'll think about designing a 3d printed part to make it easy to attach and release the servo wiper from the pot. I was also thinking about using a 16x2 LCD display to show the linear regression co-efficients, rather than needing to use the serial monitor. Thanks for your ideas!

Add projectSign up / Login