A touchscreen in the wall that allows you to control each and every LED light in your ceiling independently and phone controllable!
Project in progress by Joey Pongallo
All my lights have LED drivers on them and my lights are dimmable. If your lights do not say dimmable on the box or the lights themselves, no ac dimmer would work, only a relay to turn on and off. If you want to only control all of them at once then 1ch ac dimmer would work. If you want to control each independently and possible all at once, then the 8ch module can be used.
I am using an AC dimmer not an LED. I have 8 LED lights that have drivers hooked up to each in my ceiling. all the drivers are wired up to the 8channel AC dimmer which I control through the Arduino. Here is the unit : https://www.ebay.com/itm/Krida-Electronics-8CH-AC-LED-Light-Dimmer-Module-Controller-Board/173335870139?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Or connect with your social account:
New here? Create an account