MKR1000 Servo Control Panel

Project tutorial by Scott Beasley

  • 7,002 views
  • 3 comments
  • 20 respects

Remote Control Gripper Bot

Project tutorial by Scott Beasley

  • 9,071 views
  • 8 comments
  • 19 respects

Simple multi-mode 4wd Rover JR-001

Project tutorial by Scott Beasley

  • 22,180 views
  • 3 comments
  • 42 respects


Arduino Altair 8800 Simulator

Project tutorial by David Hansel

  • 113,692 views
  • 115 comments
  • 210 respects

POV Cylinder with Arduino Due

Project tutorial by Harald Bauer

  • 35,500 views
  • 31 comments
  • 93 respects

The Arduino Gatekeeper

Project tutorial by Timothy Le

  • 20,176 views
  • 0 comments
  • 53 respects

  • Remote Control Gripper Bot over 3 years ago

    Thanks. The code is listed under the Rover code tab under the Code section. If you don't see it, I can put it out in pastebin for you.

  • Remote Control Gripper Bot over 3 years ago

    The bot chassis, gripper, and brackets are from Servocity and would cost around $45USD plus shipping. The servo, Arduino and other parts would about $20-$25 dollars if you got them off ebay.

  • MKR1000 Servo Control Panel over 5 years ago

    I think Vin has a max of 5v, so 3 aa alkalines should power it. I would go for a USB power bank though or a JST ended 3.7v lipo. I will add that any device with Wifi will be power hungry though.

Add projectSign up / Login