Public projects 5
Control DC motors trough USB serial port
Project tutorial by luciorocha
- 1,265 views
- 0 comments
- 0 respects
Toolbox 1
_ztBMuBhMHo.jpg?auto=compress%2Cformat&w=400&h=300&fit=max)
Respected projects 0
Comments 16
AI-Thinker AI-Cloud Inside ESP8266 Update Firmware(REVIEWED) about 1 year ago
AI-Thinker AI-Cloud Inside ESP8266 Update Firmware(REVIEWED) about 1 year ago
You should enable the proper settings in Arduino IDE. I update the tutorial contents, you could take a look again. If you do not use the same settings of the Flash Download Tools in Arduino IDE, the serial monitor will show these strange characters. Hope this help.
ESP8266 + L298N Motor Drive + Smartphone about 3 years ago
Hi,
ESP8266 is very limited in its hardware. But you could think about setup minor values, instead send an entire struct with a lot of fields.
Hope this help,
Lucio
.........
Citando "Hackster.io" help@hackster.io:
Nop. You should remove the Arduino ATMega chip. It is the better choice to avoid problems.