IoT Made Easy w/ UNO, ESP-01, ThingSpeak & MIT App Inventor

Project tutorial by MJRoBot

  • 15,479 views
  • 12 comments
  • 29 respects

Electronic Playground With Arduino and Scratch 2

Project tutorial by MJRoBot

  • 3,701 views
  • 0 comments
  • 16 respects

Physical Computing - Scratch for Arduino

Project tutorial by MJRoBot

  • 3,112 views
  • 2 comments
  • 14 respects


Replicated projects 0

 MJRoBot hasn't replicated any projects yet.

Mobile IoT Weather Station with UV Index

Project showcase by Carlos Orts

  • 7,792 views
  • 15 comments
  • 32 respects

Mini Telegraph

Project showcase by Yegor_A

  • 10,891 views
  • 12 comments
  • 73 respects

Robot for supercool indoor navigation

Project tutorial by Team oblu

  • 13,037 views
  • 9 comments
  • 40 respects

  • Local and Remote Programmable Robotic Arm about 2 months ago

    Jesan, I tried but did not find it. This was one of my first projects with Arduino 3 years ago. first, I suggest that you change the display communication with Arduino. Use a I2C interface. You will only need 4 wires. Much simple. Regarding the servos and other stuff, follow the pins on the code it is easier than follow diagram.
    Thanks
    Marcelo

  • Line Follower Robot - PID Control - Android Setup about 2 months ago

    You must use a H-Bridge and RE-write the code. It is not complicated, but you must put attention. Once my code is done “in blocks” (functions), will facilitate your work.

  • Mobile IoT Weather Station with UV Index 5 months ago

    Very nice project. Thanks

Add projectSign up / Login