Arduino Temp. Monitor And Real Time Clock With 3.2" Display

Project tutorial by Nick Koumaris

  • 340 views
  • 0 comments
  • 2 respects

DIY Soil Moisture Monitor With Arduino and a Nokia 5110 D...

Project tutorial by Nick Koumaris

  • 752 views
  • 0 comments
  • 6 respects

Arduino TEA5767 FM Radio Receiver

Project tutorial by Nick Koumaris

  • 788 views
  • 1 comment
  • 5 respects


Replicated projects 0

 Nick Koumaris hasn't replicated any projects yet.

Respected projects 1


  • Arduino Tamagotchi Clone - Digital Pet 4 months ago

    The ATMEGA328 can work at a voltage from 1.5V - 5V. The lipo battery when charged provides 4.2V and the charging board cut-off the voltage below 2.5V to protect the battery from discharging completely.

  • The Intel Arduino 101 Hardware Neural Network with MNIST 4 months ago

    This is fantastic! Thank you very much for your time Marcus! I just received my 101 today. I couldn't believe my eyes when I discovered that there is a NN embedded to this chip! Your post will help me a lot to get started! Thanks again!

  • Arduino Touch Tic-Tac-Toe Game 5 months ago

    In the code, there a function called initDisplay. Replace this function with the code below:

    void initDisplay()
    {
    tft.reset();
    tft.begin(0x9341);
    tft.setRotation(3);
    }

Add projectSign up / Login