Public projects 7
This project shows how to program an Arduino Mega 2560 using Simulink to receive the signals from an R/C receiver.
R/C Controller for Arduino and Simulink
Project tutorial by Team MATLAB Makers
- 6,586 views
- 2 comments
- 8 respects
Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.
IR Proximity Sensors With Simulink And Arduino (Part 2)
Project tutorial by Team MATLAB Makers
- 1,440 views
- 1 comment
- 0 respects
Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.
IR Proximity Sensors with Simulink and Arduino (Part 1)
Project tutorial by MATLAB Makers
- 4,560 views
- 3 comments
- 10 respects
Toolbox 7
Replicated projects 0
Respected projects 14
Ever wondered how much CO level is in your city air? How about the temperature and humidity around you? If so, welcome to this project page!
Wireless weather station (Arduino + ESP8266 + Thingspeak)
Project tutorial by Alin-Constantin Paun
- 10,881 views
- 2 comments
- 17 respects
A complete DIY weather station that submits its data to the "THINGSPEAK" website, where it can be viewed from any browser.
Rube Goldberg Weather Station with Internet Data Storage
Project in progress by randtekk
- 7,540 views
- 6 comments
- 43 respects
Comments 2
IR Proximity Sensors with Simulink and Arduino (Part 1) over 1 year ago
MKR1000 Unboxing and Testing (7 Steps) about 3 years ago
Anton - thanks for the great introduction to the MKR1000. I have 1200 mAh Li-Po batteries and none of them will charge with the MKR1000. Has anyone got the charging to work? Thanks!
Hi Logan. Thanks for the comment! I think that the Uno will work just fine. If you use Simulink, the Uno is supported. https://www.mathworks.com/hardware-support/arduino-simulink.html Let me know if you try this.