Public projects 2

Arduino TV out cable

How to make a cable that can connect your Arduino board to a TV RCA video jack. Put your Arduino on the big screen!

Arduino TV out cable

Project tutorial by Paul Scott

  • 33,220 views
  • 4 comments
  • 44 respects
EL Tape Music Visualiser

Visualise your favourite music mp3's with strips of glowy light awesomeness!

EL Tape Music Visualiser

Project tutorial by Paul Scott

  • 4,622 views
  • 12 comments
  • 15 respects

Toolbox 1

A000066 iso both
Your entry to the unique Arduino experience: from the basics of electronics to rapid prototyping.

Arduino UNO & Genuino UNO

Respected projects 2

1Sheeld CanSat

A successful attempt at making a fully functional Telemetry CanSat using 1Sheeld.

1Sheeld CanSat

Project tutorial by Fatima Fouda

  • 4,585 views
  • 0 comments
  • 20 respects
Vertical Hydroponic Farm

IoT Enabled Hydroponic Farm

Vertical Hydroponic Farm

Project in progress by Paul Langdon

  • 70,242 views
  • 25 comments
  • 347 respects

Comments 4

See all of Paul Scott's comments
  • EL Tape Music Visualiser about 4 years ago

    Parts of EL tape are not individually adressable, but you could use more strips of tape to create the desired effect.

  • EL Tape Music Visualiser about 4 years ago

    EL tape takes a 5v input from the arduino or whatever, and has a built in inverter that pushes it up to 220v IIRC. You can use a small battery pack, or USB to power them, but I am not sure how long it lasts. I know that Adafruit sells a portable inverter for EL but I have no experience with it...

  • EL Tape Music Visualiser about 4 years ago

    LED light are points, while el tape is electroluminescent itself. The whole tape/wire lights up. You could easily achieve this project without el and just use 3 leds instead!

Add projectSign up / Login