Project in progress
Ambientlight

Ambientlight

Ambientlight for Raspberry PI and Kodi

  • 3,290 views
  • 1 comment
  • 6 respects

Components and supplies

12994 02
Raspberry Pi 1 Model B+
×1
Ph a000066 iso (1) ztbmubhmho
Arduino UNO
×1
Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix
×1

About this project

NeoPixel Matrix Boblight By Pierre Goude.

This is a setup for Boblight in Kodi with and an Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix

Step 1 is to already have Kodi as your mediacenter on a Raspberry pi.

Make sure to have boblight and boblighthd installed in Kodi.

step 2, connect your Adafruit NeoPixel Shield and at least solder 5v, ground and datapin 6

step 3 upload Neopixel-matrix-boblight.ino to the Arduino one

step 4 upoad boblight.conf to the raspberry pi tex \\kodi\Userdata\addon_data\service.multimedia.boblightd\ ( kopy existing conf-file as backup!)

step 5 reboot raspberry pi.


If you are using strips instead, you must generate a new boblight.conf with http://www.tweaking4all.com/home-theatre/xbmc/boblight-config-maker/ 

for better wiki follow http://www.tweaking4all.com/home-theatre/xbmc/xbmc-boblight-openelec-ws2811-ws2812/



Code

Comments

Similar projects you might like

Weather Wand

Project in progress by Dan Fein

  • 14,967 views
  • 3 comments
  • 30 respects

Control your light system with your voice

Project tutorial by Maha Raafat

  • 42,021 views
  • 22 comments
  • 160 respects

Touch LED Table - Retrogaming And Ambiant Light

Project tutorial by Arbalet Project

  • 11,573 views
  • 1 comment
  • 50 respects

Hertzian Armor

Project tutorial by Team wearables2020

  • 8,411 views
  • 0 comments
  • 17 respects

smart robot

Project in progress by Arduino Arab

  • 5,085 views
  • 1 comment
  • 10 respects

Alexa Humour DJ

Project tutorial by Team Start-Down

  • 1,862 views
  • 0 comments
  • 12 respects
Add projectSign up / Login