Arduino 4 Relays Shield

The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller.

The Shield features four relays, each relay provides 2 pole changeover contacts (NO and NC); in order to increase the current limit of each output the 2 changeover contacts have been put in parallel. Four LEDs indicate the on/off state of each relay.

Vivarium Monitor and Controller

Project showcase by cfar

  • 215 views
  • 0 comments
  • 1 respect

Herb Box Eco System

Project tutorial by Walter Heger

  • 34,092 views
  • 19 comments
  • 214 respects

J.A.R.V.I.S. : A Virtual Home Assistant

Project tutorial by Team Blitzkrieg

  • 37,746 views
  • 14 comments
  • 209 respects

Fan Controlled By DS18B20 Temperature Sensor With 20x4 LCD

Project in progress by makeeuropeanu

  • 7,127 views
  • 2 comments
  • 9 respects

DINternet IoT Controller

Project in progress by Craig Hissett

  • 2,467 views
  • 2 comments
  • 8 respects

IOT2020 Access Control

Project tutorial by Allan Gallop

  • 4,455 views
  • 0 comments
  • 8 respects

dasBridge

Project in progress by Team dasBridge Team

  • 3,782 views
  • 0 comments
  • 12 respects

Arduino-Powered Pellet Boiler

Project showcase by Federico Aschero

  • 3,320 views
  • 0 comments
  • 9 respects

IoT Controlled Planter Lights

Project showcase by John Weers

  • 1,458 views
  • 0 comments
  • 6 respects

Controller for Chemical Dosing Pump

Project in progress by Team Trouble

  • 591 views
  • 0 comments
  • 0 respects

Controlling a Siren with Alexa

Project tutorial by Erik Lane

  • 418 views
  • 0 comments
  • 0 respects

Home Connected

Project showcase by y-ayachi

  • 113 views
  • 0 comments
  • 0 respects

Smart Pipes for Smart Cities

by RSB_TEAM

  • 101 views
  • 0 comments
  • 2 respects

Automated Plant Watering System

by Brendan Loveng

  • 343 views
  • 0 comments
  • 0 respects
Add projectSign up / Login