Arduino Ethernet Rev. 3

The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.

A separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.

Compatible with PoE Module 12V (X000002).

Digital Dashboard

Project in progress by eric

  • 13,760 views
  • 11 comments
  • 37 respects

Home Automation With Cayenne Arduino-IOT Projects

Project in progress by MrModder

  • 19,464 views
  • 3 comments
  • 42 respects

Insteon Gateway

Project tutorial by Philippe Libioulle

  • 3,298 views
  • 4 comments
  • 15 respects

Arduino Home Automation Control Board IoT

Project tutorial by Team My Arduino Home

  • 8,712 views
  • 3 comments
  • 23 respects

Arduino Temperature and Current Monitoring

Project showcase by Radek Chromík

  • 677 views
  • 0 comments
  • 0 respects

Internet Temperature Station

Project tutorial by xXarduino_11Xx

  • 618 views
  • 0 comments
  • 3 respects

Ethernet Controlled LED

Project tutorial by xXarduino_11Xx

  • 128 views
  • 0 comments
  • 2 respects

Keep The Patient Clean KTPC

Project tutorial by Jorge Emmanuel Copado Ramírez

  • 5 views
  • 0 comments
  • 0 respects

Arduino Home Automation

Project in progress by electricSwine

  • 71 views
  • 0 comments
  • 0 respects

Alexa My Notifications

by Sam Machin

  • 65 views
  • 0 comments
  • 2 respects

My Remote Home

by LEONARDO HERNANDEZ

  • 68 views
  • 0 comments
  • 1 respect
Add projectSign up / Login