Arduino Mini USB serial adapter

This board converts a standard USB connection to the 5V TX and RX an Arduino requires for communication. You can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer.

This version of the module has no pins soldered on it.

It is based on the FT232RL chip from FTDI (drivers are included with the Arduino software).

Low-Cost ECG Pathology Detection with Deep Neural Networks

Project tutorial by EndlessTeam

  • 6,638 views
  • 9 comments
  • 30 respects

ATmega Alien Themed Slot Machine

Project tutorial by Dan Murphy

  • 4,590 views
  • 6 comments
  • 26 respects

Programming the Arduino Pro Mini without Soldering Pins

Project showcase by Ruben Zilzer

  • 5,418 views
  • 4 comments
  • 29 respects

Maximo

Project in progress by ShapedAna

  • 577 views
  • 2 comments
  • 1 respect

Use Python to Access a SIM Module

Project showcase by Wilson Wang

  • 6,460 views
  • 0 comments
  • 9 respects

i2c LC1602 display drived by STM32F103

Project showcase by FLORICA Tudor-Nicusor

  • 2,953 views
  • 0 comments
  • 1 respect

Adding a Remote Switch to Sonoff: One Pin for Switch+LED

Project tutorial by msillano

  • 2,278 views
  • 0 comments
  • 3 respects

Remote Facility Command and Sensing System

Project tutorial by Gustavo Bertoli

  • 1,869 views
  • 0 comments
  • 7 respects

ENGI_301 Project_01

Project tutorial by Bonnie Wang

  • 709 views
  • 0 comments
  • 0 respects

MQTT-chat. Using MQTT for messaging

Project tutorial by sanruskmv

  • 704 views
  • 0 comments
  • 4 respects

Ultrasonic sensor arduino project robot

Project tutorial by mellanierodriguez50

  • 233 views
  • 1 comment
  • 0 respects

Tangle Town

by mstx

  • 32 views
  • 0 comments
  • 0 respects
Add projectSign up / Login