Arduino MKR IoT Bundle

The kit is based around the MKR1000—a powerful board that combines the functionality of the Zero and the Wi-Fi Shield—and enables Makers to add connectivity to their designs with minimal prior networking experience.

Each bundle includes:

  • 1 Arduino MKR1000 board, with header soldered.
  • 1 micro USB cable, 
  • 1 400-point breadboard, 
  • 70 solid-core jumper wires, 
  • 1 9V battery snap, 
  • 1 stranded jumper wire 
  • 1 stranded jumper wire,
  • 6 phototransistors, 
  • 3 potentiometers (10 kilohm), 
  • 10 pushbuttons, 
  • 1 temperature sensor (TMP36), 
  • 1 tilt sensor, 
  • 1 alphanumeric LCD (16 x 2 characters), 
  • 1 bright white, 
  • 34 LEDs (1 bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue), 
  • 1 small DC motor (6/9V), 
  • 1 small servo motor, 
  • 1 piezo capsule (PKM17EPP-4001-B0), 
  • 1 H-bridge motor driver (L293D), 
  • 1 octocouplers (4NE5), 
  • 2 MOSFET transistors (IRF520), 
  • 5 capacitors (100uF),
  • 5 diodes (1N4007), 
  • 3 transparent gels (R,G,B)
  • 1 male pin strip (40 x 1), 
  • 20 resistors (220 ohm), 
  • 5 resistors (560 ohm), 
  • 5 resistors (1 kilohm), 
  • 5 resistors (4.7 kilohm), 
  • 20 resistors (10 kilohm), 
  • 5 resistors (1 megohm), 
  • 5 resistors (10 megohm)

 

Plant Communicator

Project tutorial by Arduino

  • 62,600 views
  • 18 comments
  • 143 respects

IoT Cloud - Getting Started

by 5 developers

  • 48,141 views
  • 17 comments
  • 100 respects

Love You Pillow

Project tutorial by Team Arduino

  • 36,302 views
  • 7 comments
  • 30 respects

Pavlov's Cat

Project tutorial by Arduino

  • 28,648 views
  • 4 comments
  • 43 respects

The Nerd

Project tutorial by Arduino

  • 18,250 views
  • 1 comment
  • 12 respects

PuzzleBox

Project tutorial by Arduino

  • 17,281 views
  • 1 comment
  • 13 respects

Control Your IoT Cloud Kit via MQTT and Node-RED

Project tutorial by 3 developers

  • 122 views
  • 0 comments
  • 2 respects
Add projectSign up / Login