Arduino USB 2 Serial micro

This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Ethernet or any other boards with an FTDI cable-compatible connector.

It features the Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The USB Serial module has an ISCP interface, allowing you to reprogram the chip when placed in DFU mode.

The pinouts on the connector are compatible with a standard FTDI header (as well as the Adafruit and Sparkfun USB-Serial adapters).

Arduino RFID System Based on RS485

Project tutorial by ardumotive and john_vslks

  • 2,467 views
  • 2 comments
  • 6 respects

Arduino Bluetooth RC Car

Project tutorial by ardumotive

  • 7,978 views
  • 1 comment
  • 18 respects

Arduino Wireless Weather Station

Project tutorial by ardumotive

  • 1,800 views
  • 0 comments
  • 5 respects
Add projectSign up / Login