Arduino USB Host Shield

The Arduino USB Host Shield allows you to connect an USB device to your Arduino board. The Arduino USB Host Shield is based on the MAX3421E (datasheet), which is an USB peripheral/host controller contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0.The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board. The following device classes are supported by the shield: HID devices, such as keyboards, mice, joysticks, etc.

USB-BLE Wireless MIDI Adapters

Project tutorial by Joe Bowbeer

  • 10,392 views
  • 6 comments
  • 9 respects

NAMLA

Project in progress by mahmoudsabra

  • 6,515 views
  • 1 comment
  • 20 respects

Second Keyboard for Macros

by Tygo-bear

  • 4,288 views
  • 0 comments
  • 2 respects

MultiBoard Setup/install

by Tygo-bear

  • 1,447 views
  • 0 comments
  • 2 respects

CSMA CAR v3.2.13

Project showcase by AmineCHIALI

  • 229 views
  • 0 comments
  • 3 respects

Atari PS3 controller

Project tutorial by amurison718

  • 3,245 views
  • 0 comments
  • 3 respects

Atari 8-Bit USB Mouse

Project tutorial by amurison718

  • 1,681 views
  • 0 comments
  • 0 respects
Add projectSign up / Login