A volume control for the TV/receiver using Arduino Nano.
3D-printed enclosure makes it look lite Amazon Dot.
Project tutorial by Sam
The LittleBot is a simple 3D printed Arduino robot for kids to get introduced to STEM.
Project showcase by Slant Concepts
"Otto DIY with steroids" + Bluetooth + APP + switch + sensors + strength +...
Project in progress by Otto builders
Throw a real-life ball to catch Pokémon in Pokémon Go.
Project tutorial by MarJoh
I designed this stepper motor with eight electromagnets, six neodymium magnets, with a 3d printed rotor and stator housing.
Project tutorial by Anthony Garofalo
This project is an Arduino radar. It is a simulation of a radar.
A voice controlled, arduino101 based mobile robot
by Gregory O. Voronin
This is a mostly printed 3D Printer very suitable for a hobbyist. It's an easy and cheap way to get into 3D printing.
Project showcase by John Weers
Build a 3D printed Lunar Phase Clock for your desk or nightstand.
Project tutorial by G4lile0
7 awesome cases for 7 different circuito.io-supported components. It's 3D time!
Project in progress by circuito.io team
While docked, the Pebble Time speaks the time to you with a wave of your hand.
Project showcase by Engineerable
Tito is a Bi-ped, dancing DIY robot, derivative from Zowi and Bob. Basically has been adapted to a standard Arduino UNO board.
Project tutorial by Camilo Parra Palacio
A romantic project for Valentine's Day - a 3D printed sunflower that opens and closes in reaction to light. Have a Sunny Valentine!
Project tutorial by circuito.io team
Ever wonder how much filament you actually used for a project or have an old mechanical ball mouse laying around to be recycled?
Project in progress by Bin Sun
You can make someone else's sunglasses see-through via BLE and check them out from far away, perhaps with your heartbeat.
Project tutorial by Kitty Yeung
Intel Edison expands a new 3-D printer market.
Project tutorial by 4 developers
Move your drone racing skills to the next level with these interactive air gates!
The instant your prankee lifts up this 3D-printed cup it starts violently vibrating! The electronics separate from the cup for easy washing.
Project tutorial by Alex Wulff
This is first version of my low cost 3d printed robot arm based on Ikea Tertial lamp.
Project tutorial by Karagad
A large DIY Kossel XL RepRap 3D printer.
Project tutorial by Johnathan Hottell
The Materia 101 is the first official Arduino 3D printer. It runs using an Arduino Mega 2560 and a “RAMPS 1.4” shield. Learn the basics.
Or connect with your social account:
New here? Create an account