I made an Arduino library allowing simple communication with uECG device using nRF24 module - minimal example takes just a few lines.
Project tutorial by Dmitry Dziuba
This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!
Project tutorial by Dynamic Innovator
An open microbial bioreactor for growing cultures of about 1L.
Project in progress by Team Open Bioeconomy Lab
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
Project tutorial by Marius Dima
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
Quality microcentrifuges are generally too expensive for most people to afford. This project aims to provide a low-cost alternative.
Project in progress by kemfic
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
Project tutorial by ADITI
Corolla is a lamp that can be adjusted to focus its light on a reading/working spot or to spread light around for ambient lighting.
Project in progress by Sebastian Groza
Allows students, educators, and hobbyists to learn about biomedicine by monitoring heart rate, temperature, and other physiological metrics.
Project in progress by Orlando Hoilett
A arduino robot that walks just like an ant. This form of locomotion has never been used before.
Project showcase by Stephane Hatgis-kessell
Thermally insulated box that maintains sensitive samples like vaccines and cells at the desired temperature via battery or 12V sources.
Project tutorial by Viola Introini and Dean Kos
Automated colour transmission and reflection measurement system for quantifying results of measurements with a colour change.
Project in progress by Eric Lowe
If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.
Project tutorial by MEGA DAS
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
Macrophotography of fern gametophytes using a DIY focus stacking system.
Project tutorial by Jennifer Deegan
Multichamber real-time imaging device for cell cultures under different conditions. For: Isthmus Engineering Award, Best Project Award.
Project in progress by 3 developers
A sensor-pump system which would be able to adjust drug output of aminoglycosides based on real time sensing of drug in plasma.
Project in progress by Biomaker Challenge 2017: Team 14
Our device, the Oscillostat, continuously evolves bacteria while oscillating between selective pressures to mimic fluctuating environments.
Project in progress by Jarrod Shilts and Om Patange
Attempt to build an ultra-low cost molecular reactor, using computer controlled recirculating air.
Project tutorial by Jim Haseloff
This project will show you how to make a Bionic Hand Controller.
Project tutorial by MisterBotBreak
A raspberry pi based cereal phenotyping device
Project in progress by Team MacroImager
Or connect with your social account:
New here? Create an account