Connect up to 10 buttons using a single interrupt.
Project tutorial by Svizel_pritula
The famous connected button to order your favorite drink using Sigfox network.
Project tutorial by Louis Moreau and Aurelien Lequertier
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
A simple game using Arduino Uno, 16x2 LCD and a push button.
Project tutorial by
How long have we been pressing this button? (Interruptions and EEPROM)
Project tutorial by javier muñoz sáez
Ever wonder what others are thinking about a particular question? This machine will ask it for you and stores results in the cloud.
Project tutorial by benstr 🚀
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
this project uses a touch sensor to turn on and off an led on pin 13.
Project tutorial by tech guy
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
by Alex Glow
Create your own code red button for use in simulation scenarios. Flashing LEDs and button!
Project tutorial by David Escobar
Blinking LEDs with Arduino and some buttons.
Project tutorial by Super Kid
This project will show you how to fade lights, add a button to it.
Project tutorial by Phuong Vo
Our project is a microcontroller that plays 4 different melodies/songs depending on which button you press.
Project tutorial by Ava Baker -21 and Natalie Clark -20
An in-depth exploration of controlling your Arduino with a button!
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
This tutorial will show you the easiest and best way to use a pushbutton with your Arduino board!
Project tutorial by SMM2
This combines a two-axis joystick, a three-axis accelerometer, and two buttons into one package.
Here's my minimal setup of a coilgun which uses a relay module to trigger the coil.
Project tutorial by Arnov Sharma
A small game in which the player must match the sequence to earn points. The game ends when the time runs out.
Project showcase by Reid Paulhus
This toy consists of 4 buttons, 4 LEDs 5 potentiometers and 1 speaker. Toddlers can turn, slide and push to change the lights & sounds.
Project tutorial by Isaac Wolf and Sarah Worthington
Or connect with your social account:
New here? Create an account