Reducing the current drain is a must especially for the LoRa Version of the MKR Series. But there are some pitfalls which must be avoided.
Project tutorial by andreas_waldherr
WiFi enable your Arduino device and communicate with it from anywhere using a serial command-response terminal interface.
Project tutorial by stevetearle
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
Project in progress by philippedc
This is a BMS charger that would be as universal as possible for testing Li-ion or LifePo4 cells.
There are many charge controllers available, but ordinary cheap ones are not efficient enough to use with maximum power from solar panels.
Project tutorial by Abhi Verma
The easiest way: install Parallax then upload the Arduino code.
by Mahamudul Karim Khondaker
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
Project tutorial by Dhairya Parikh
An electric furnace-air handler, arduino-based, controller.
Project showcase by desbiensl
Learn how to use Relay, Ultrasonic sensor and Arduino in one cool and easy project
Project tutorial by Ahmed Hamdy
Electronic greenhouse controlled real-time, because the environmental conditions change continuously, so we need an efficient monitoring.
Project tutorial by Team cormaz
Get your essential appliances off the grid with just one solar panel
Project in progress by Markus Loeffler
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Accumulation of moisture in a closed up space like a bathroom can lead to the appearance of mould, which can cause health issues.
Project showcase by LIMPINGLIM
An outlet that can control your devices that need to be plugged in.
Project tutorial by tylerpeppy
On this sample I would like to explain why PID-control should be used for speed controls and how the direction can be inverted.
Project tutorial by tolgadurudogan
A solid-state, low-cost, reliable solution for solar hot water from PV. Zero maintenance & CO2, connected, smart combi pre-heat control.
Project showcase by stevetearle
Taking control of your plants growing process
Project in progress by Ain't no party like a Unix party
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
The smart solution to control multiple zone heating in your house, Controlling the Floor Unit pump will save you over 150 Euro/Year!
Project tutorial by erkr
Or connect with your social account:
New here? Create an account