Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
I built an Arduino Weather Station. It uses a DHT 11 (it will also work with DHT21 DHT22).
Project tutorial by woutvdr
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
On the display is printed temperature (celsius) and humidity (%) with a DHT11. When it's raining the LED lights up. You need a rain sensor!
Project showcase by Rick_Findus
This tutorial will show you how to use DHT11 with Arduino.
An IoT bird feeder which tweets when the lovely birds are landing and eating.
Project showcase by Gaël Porté
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Project showcase by Mr_Xu
Air meter making, a second time! Let's look at temperature and humidity using the DHT 11 module.
by 4 developers
In this project, I've interfaced DHT11 with Arduino and then sending data of DHT11 which is humidity and temperature to phpmyadmin database.
Project tutorial by Embedotronics Technologies
Ever care about the place you may spend one third of a day? enVMon captures noise level, air quality, UV level, temperature and humidity.
Project showcase by comcrazy
I've always wondered if there were any real differences between temperature and humidity sensors, especially DHT11 and DHT22.
by Achraf Oukheir
Weather Station With Arduino/Genuino, ESP8266, BMP180, DHT22 and Thingspeak.
Project showcase by Tittiamo
Automatically turn on the humidifier when the environment humidity is below 50%.
Project showcase by chenwei19940207
Basic weather station with DHT11 sensor, Arduino, BLE Shield and iShield App.
Project tutorial by Victor Carreño
Small temperature/humidity/atmospheric pressure monitor using Sigfox to transfer the data. Powered by solar energy to monitor beehives.
Project showcase by Vilém Kužel
An automated humidor using an Arduino — with or without building your own humidor.
Project tutorial by MatthiasDankers
A small device that can be placed in a car's console to serve various functions such as temperature, time, date, etc.
Project showcase by Bie
An industrial IoT prototype using Arduino, WIZ750SR, Raspberry Pi, and Hologram Nova to monitor environment.
Project tutorial by Muhammad Afzal
THGadget is a temperature, humidity and date/time Arduino Mega 2560-based device. The sensors: DHT11 and RTC HT1380.
Project tutorial by Hernan Monserrat
The comfort level was symbolized by blinking 5 different colored LED using HUMIDEX (a combined parameter of temperature and humidity).
Project tutorial by somenjana
A beginner project utilising an Arduino and a BME280 sensor capable of giving you 4 environmental readings.
by Electorials Electronics
Or connect with your social account:
New here? Create an account