Upgrade old manual kiln to a digital controller with firing schedules (ramp, target, hold) and data logging.
Project showcase by arduinokiln
LQ control of Ball and Plate system controlled by Arduino MEGA 2560.
Project showcase by davidhamor
[@version 1 ] PID loop is used in this project to control the speed of a permanent magnet DC motor.
Project showcase by tareqwaleed1996
This project uses Simulink to make an Arduino based blower fan that levitates a ping pong ball at a specified height.
Project tutorial by DanDoherty
This project consists of the assembly of a level control system in a tank
Project tutorial by zezarandrade
PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.
Project tutorial by saifalikabi
I have used a 1.kk flight controller along with an Arduino Nano and an ultrasonic sensor to add the feature of altitude hold.
Project tutorial by harsh dokania
This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.
by Danica Fernandez
I created a GUI for Arduino. Using the GUI and the provided Arduino code you can control (PID) and measure two values
Project tutorial by Zaragesh
Or connect with your social account:
New here? Create an account