Halloween is near, so grab your Arduino, make an EMF detector and play with it.
Project showcase by Patel Darshil
Power management for portable Arduino projects.
Project tutorial by craic
An AC load controller to periodically turn on/off any AC load.
Project showcase by Shahariar
A smart power strip to monitor current and smart power cutoff.
Project tutorial by bbtinkerer
The CHPC is a minimal cost heat pump (HP) controller.
Project tutorial by gonzho
Use two transistor to dim a 12V ledstrip with a mkr1000.
Are you looking for a board, that can be used to control strong DC motors as well as highspeed brushless motors? Here you've found it.
by Infineon Team
This project is a continuous variator of supplied power for power tools, lights or heating. Works universally for AC or DC power supplies.
Project tutorial by ming huang
A soft switch with integrated energy monitoring enabling spark-free switching for electric vehicles and drones.
Project tutorial by Vishwas Navada
6.4A-2uA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Project showcase by wfriedrich
In this project, I will design a simple Arduino Car Reverse Parking Sensor Circuit using Arduino UNO and HC-SR04 Ultrasonic Sensor.
Project tutorial by mudit_5246
Or connect with your social account:
New here? Create an account