When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Project tutorial by Chandran N
A cheap beam break sensor utilising a reflector panel instead of a transmitter / receiver setup. Capable of handling long distances.
Project tutorial by mova
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
In this project I made a touch sensor using a coin that works based on Arduino Capacitive Sensing Library.
Project tutorial by Amal Mathew
Meet Bert, a bipedal walking monster robot.
Project showcase by 8bitsandabyte
Using the Actobotics Runt Rover Peewee chassis kit and an Arduino controller, motor driver and sensors from eBay or other vendors.
Project tutorial by Scott Beasley
Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.
Project tutorial by Team MATLAB Makers
I am going to show you how to make a simple obstacle sensing system with cheap parts like IR LED and photo diode.
Project tutorial by muhammed shameel k.v
A robot that has ultrasonic sensors mounted on a basic servo to detect obstacles, swerve around them, and continue on a random path!
Project showcase by Xavier Tan
Rudimentary version of the Soliton Radar from Metal Gear Solid that can detect walls and movement around the user.
Project tutorial by Michael Darby - 314Reactor
This is a start guide for using the GP2Y0A02YK0F distance sensor with Arduino and TFT Touch Screen.
by vicente zavala
Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.
Project tutorial by Jithin Sanal
Make your room untouchable while you are not in it by using an Arduino and two HC-SR04 sensors.
Project tutorial by Kutluhan Aktar
Build a proximity sensor using aluminium foil and a high value resistor.
Two versions based on Grove Light Sensor, one is reset by a push button, the other one requires a passcode
Project tutorial by SurtrTech
A quick halloween scare prank using an Arduino, HC-SR04 ping sensor, and a servo. A spider drops on anyone trying to ring the bell.
Project tutorial by Kristian Blåsol
Project tutorial by MATLAB Makers
What if a regular M&M's dispenser was changed to automatically serve the chocolate candies? Let's go for it!
Project showcase by Marcelo Ávila de Oliveira
Project to implement basic inputs and outputs by commenting on the current temperature!
Project tutorial by Seo Michael
Or connect with your social account:
New here? Create an account