This device runs a desired length and quantity of wires and cuts each length.
Project in progress by 30percent
The Arduino is simple, cheap and power efficient but has limitations. Sometimes, you may want to have more than one access your I2C bus.
by Chip McClelland
Serial Communication between ESP2866-12 (NODE-MCU) and Arduino to increase the number of analog pins as my primary work.
Project showcase by Pawan Kumar
Use a Bluetooth module to replace a traditional wired connection for transmitting serial data.
This article will show how to communicate between Arduino and Visual Studio through COM (UART) port.
Project tutorial by whitebank
Bring the versatility of the Arduino Uno to the powerful world of IoT with the Onion Omega board. Make any Arduino project IoT compatible.
by Shervin Oloumi
Three ways to use Arduino as a USB to TTL converter. Helpful one!
by Patel Darshil
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
This is a step-by-step tutorial on how to use the RAK811 LoRA node module and send LoRa packets to a gateway.
by Naresh krish
With the coming .NET Core 3.0, cross-platform serial port is available. Let's have a try on RPi Raspbian.
by Leon Song
Arduino and Python-based project that will help us read the sensor values and plot it on Python.
by Asim Zulfiqar and High Voltages
Using cheap 433 MHZ RF module to establish communication between my PC and Laptop, but displays information encrypted on text LCD.
Project tutorial by Mohamed Maher
I made a tool to program the Arduino Pro Mini without the need to solder pins to attach the USB bus port.
Project showcase by Ruben Zilzer
Arduino and Python-based project that will help us read the sensor values and plot it on MATLAB.
Project tutorial by Asim Zulfiqar and High Voltages
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
by Josh From BreakoutBros.com
This project describes the steps to enable UART access on the Wiscore Alexa Board and communicate with an Arduino board directly via serial.
Serial communication between the Pycom LoPy and the Arduino Uno.
by Rob Braggaar
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
by Giovanni Gentile
It is controlled by an Arduino Mega 2560 and connected to Raspberry PI via WiFi using ESP8266. It is also able to run independently.
Project tutorial by robotedh
In this project I will guide you on how to make your own Arduino Chameleon using TCS3200 and Arduino Uno.
by Manan Thareja
In modern world, it's very difficult to keep check on patients' health. With my project, you just need to ask Alexa for their pulse rate.
Project tutorial by Madhur Gupta
Or connect with your social account:
New here? Create an account