The sunflower follows the light using a servo motor and two photoresistors.
Project tutorial by Rick_Findus
A touchless automatic motion sensor trash can.
Project showcase by Will Su
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Introducing a super easy automated control labyrinth marble maze.
Project tutorial by AhmedAzouz
This project shows how to control a servo motor with a smartphone via Bluetooth.
Project tutorial by JANAK13
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
A basic robot using Arduino.
Project tutorial by Renga
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
Project tutorial by Jeremy Lindsay
This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.
Project tutorial by Amit Nandi (BigWiz)
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
This project will show you how to transmit variables to control a servo motor.
Record and play back a few seconds of input stored in EEPROM.
Simply the machine has four types of candies and each type has it's special code, you should tweet with this special code to get your candy.
Project tutorial by Mahmoud Ahmed
solid plastic servo operated robot gripper.
Project tutorial by Science Camp (Iraqi maker space)
GUYS TELL YOUR SUPPORT TO ME.This project one of way of smart farming which can be used for analysis of soil.
Project tutorial by gowthamkishoreindukuri
Building an RFIDD access control system.
Project tutorial by Electronic Clinic
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
Features of smart shoes: generates electricity, auto lacing, step counting, etc.
Project tutorial by Maker_Inc
Or connect with your social account:
New here? Create an account