Project showcase
HVAC Temperature And Status Monitoring With Arduino

HVAC Temperature And Status Monitoring With Arduino

Arduino enabled indoor room temperature and Air Conditioner compressor status monitoring. Android app enabled to remotely monitor the data.

  • 746 views
  • 1 comment
  • 0 respects

Components and supplies

About this project

The project is for remote monitoring of temperature and air conditioner compressor status for a HVAC system. The compressors are connected to the Arduino through the step down transformer AC to DC converter. The temperature sensor collects the temperature data and feeds it to the server through the Esp8266 wifi module connected to the Arduino.

The data feeds the Android app for remote monitoring.

Code

Untitled fileArduino
#include <SoftwareSerial.h>
    #define DEBUG true
    SoftwareSerial esp8266(2,3); 
       
       const int buttonPin = 4; 
       const int buttonPin1 = 5;
       const int buttonPin2 = 6;
       const int buttonPin3 = 7;
       const int buttonPin4 = 8;
       const int buttonPin5 = 9;
       int b1,b2,b3,b4,b5,b6 = 0,aa=0,bb=0; 
       float vout;int sens;  
                              
    void setup()
    {
      Serial.begin(9600);
      esp8266.begin(115200); // your esp's baud rate might be different
    
        pinMode(buttonPin, INPUT);
        pinMode(buttonPin1, INPUT);
        pinMode(buttonPin2, INPUT);
        pinMode(buttonPin3, INPUT);
        pinMode(buttonPin4, INPUT);
        pinMode(buttonPin5, INPUT);         
        
        sendData("AT+RST\r\n",2000,DEBUG); // reset module
        delay(1000);
        sendData("AT+CWMODE=1\r\n",1000,DEBUG); // configure as access point
        delay(1000);

Comments

Similar projects you might like

Monitoring Temperature Remotely with Blynk for Dummies

Project in progress by Cmtelesann

  • 3,439 views
  • 9 comments
  • 11 respects

Humidity and Temperature Monitoring System

Project tutorial by Vinayak Shantaram Joshi

  • 5,259 views
  • 5 comments
  • 18 respects

Temperature and humidity meter (iot)

Project showcase by 윤원호 and gledel

  • 6,340 views
  • 1 comment
  • 15 respects

Project KOOL: Temperature and Humidity Remote Monitoring

Project tutorial by vincent wong

  • 4,871 views
  • 1 comment
  • 12 respects

Temperature Monitoring With DHT22 & Arduino

by Muhammad Afzal

  • 113,834 views
  • 46 comments
  • 81 respects
Add projectSign up / Login