Public projects 1

WALTER - The Arduino Photovore Insect

Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.

WALTER - The Arduino Photovore Insect

Project tutorial by Martedi

  • 46,004 views
  • 19 comments
  • 166 respects

Respected projects 4

See all of Martedi's respected projects

Self-balancing robot with two ultrasonic proximity sensors and nRF24 communication + remote.

Arduino Self-Balancing Robot

Project showcase by Debreczeni Tamas

  • 18,862 views
  • 5 comments
  • 73 respects
Droideka

The idea is to create a functional Droideka from Star Wars, or at least something as close to it as possible!

Droideka

Project in progress by nicogou

  • 21,404 views
  • 25 comments
  • 153 respects
Project ZERBERUS - Robotic Dog

I'm trying to build a four legged walking Robot that is inspired by the Boston Dynamics Spot Mini and James Bruton's OpenDog.

Project ZERBERUS - Robotic Dog

Project in progress by AaronSilas

  • 3,181 views
  • 1 comment
  • 20 respects

Comments 6

See all of Martedi's comments
  • WALTER - The Arduino Photovore Insect over 3 years ago

    Hi. Have you checked the photodiodes polarity? They should connected in reverse biased manner. The cathodes should connect to 5v and the anodes should connect to resistors/analog arduino pins. I think I messed up on the circuit scheme.

  • WALTER - The Arduino Photovore Insect over 4 years ago

    Simply by measuring & comparing light intensity from each corners (front-left, front-right, back-left, back-right) using 4 photodiodes.

  • WALTER - The Arduino Photovore Insect almost 5 years ago

    Thank you. I really appreciate your suggestion. I didn't know about printer's micro switches before.

Add projectSign up / Login