Project showcase
Electromagnetic boost fireworks

Electromagnetic boost fireworks

A fancy idea to remotely set off fireworks in a clean and safe way

  • 5 views
  • 0 comments
  • 0 respects

Components and supplies

Capacitor 100mF 450V
×1
copper wire
×1
PVC
×1
A000066 iso both
Arduino UNO & Genuino UNO
×1
photo switch
×1
Fairchild semiconductor fqu13n06ltu image 75px
Power MOSFET N-Channel
×6
Power diode
×1

Necessary tools and machines

3d printer

About this project

For starter, This project design had been granted patent and the project team DO NOT grant any, include but not limit to, person, orgnization, third-party, to copy, imiate or any beahavour that voliates the group's patent rights.

DO NOT TRY THIS AT HOME

simply saying, it's a glorified coilgun to boost fireworks up to the sky insted of gunpowerder. which is safer, greener, and can be reused many times.

Sadly, There is not much pictures to show, cuz I lost all my pictures in my PC. These pictures comes from my classmate's cellphone.

the overall model:

power:

220VAC -> (power supply module)

24VDC -> (ZVS)

2KHz 48VAC -> (transformer)

400VAC -> (Diode retiflier)

300VDc -> capacitor

capacitor (there are 6 of these in total)

another pespective:

the fireworks pellet is covered by metal foil and would be acclerated 3 times,

our test result shows that the pellet can ve sent to around 20M high.

Schematics

abstract diagram
 fxpe32n7ba
circuit

No document.

Comments

Add projectSign up / Login