Back

Comments 4

  • Electronic Chessboard (4x4 Demo Prototype) 6 months ago

    I watched videos and I have to admit, what you did is probably the best project on chessboard one can find on the internet. Maybe I missed that but I couldn't hear which board and which type of RFID reader you used, but anyway, what you did is just amazing. It works pretty well and I really have nothing to add, sir. If you don't mind, I will ask a few questions related to your choice of components. I will send you an email.

  • Electronic Chessboard (4x4 Demo Prototype) 6 months ago

    If you wish, lets discuss via skype, I will be able to share more thoughts and to remember more. If you’re interested of course. tahir.miriyev9r1 is my username, feel free to call me after 6 pm by Italian time:)

  • Electronic Chessboard (4x4 Demo Prototype) 6 months ago

    I will watch videos soon and will share my point further. In fact, if it’s efficient to use antennas and RFID, it’s not a bad solution for solving the problem of figure recognition, since I guess every chess piece will have it’s unique ID. BUT, when I tried to set up 125kHz reader of mine, it turned out to be harder to read ID’s through serial
    port of Arduino. It’s neither fast nor practical solution, although possible to implement. That’s my opinion tho, maybe on other professional boards, compared to Arduino, it’s easier to work with RFID technology.

  • Electronic Chessboard (4x4 Demo Prototype) 6 months ago

    Hi! Well, when I was doing the project i had the same idea of using antennas under each square and one RFID reader for all of them. First of all, I have to say that it’s quite difficult to implement on practice. I contacted several engineers who tols me that to you have to make all measurement related to the number of twists,diameter of antennas etc, and it’s may not be easy for a single RFID reader to track all of them, so I decided to find another solution.

Add projectSign up / Login