Public projects 3

FM Radio with Frequency Display

Project showcase by Tauno Erik

  • 13,583 views
  • 3 comments
  • 17 respects

Programming ATtiny13 with Arduino Uno

by Tauno Erik

  • 57,674 views
  • 17 comments
  • 35 respects

Klimberdaja

Project in progress by Tauno Erik

  • 2,815 views
  • 1 comment
  • 7 respects


TinyGo on Arduino Uno: An Introduction

by Alan Wang

  • 9,206 views
  • 1 comment
  • 10 respects

Guide to Modular Firmware

Project tutorial by Lucky Resistor

  • 4,924 views
  • 4 comments
  • 17 respects

  • FM Radio with Frequency Display 6 months ago

    The capacitor does not have to be exactly 1000uf. It can be bigger or smaller. But not very small. Then it will filter out some frequencies (lower, bass). When you do not have one big capacitor, you can use two or more smaller capacitor in parallel.
    I recommend to test it before.

    PS.
    I am not a speaker or a sound specialist.

  • Programming ATtiny13 with Arduino Uno almost 2 years ago

    Where to you see ATTiny85??

  • Programming ATtiny13 with Arduino Uno about 2 years ago

    Then when you burn bootloader?

Add projectSign up / Login