What? Program an Arduino from your Raspberry Pi? It's possible, and super easy!
by Zachary Haslam
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
Simulate a traffic light using an Arduino and LEDs! This project is super cool to watch and easy to make!
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.
Project showcase by FrancoMolina
I fixed the link, sorry about that
The credits are at the bottom of the page, if you scroll all the way to the bottom you should see a section with the word "Credits" in huge letters, like I said in the post. There should also be a link in the text now
That usually happens when the sensor isn't wired correctly, I would double check that you've gotten everything setup correctly
Or connect with your social account:
New here? Create an account