Toaster Oven Conversion to SMD Reflow Oven
Arduino Nano controls the elements of a Toaster Oven based on temperature readings to reflow tin-lead solder paste on a SMD PCB.
Components and supplies
K-Type Thermocouple Probe Temperature Wire Sensor TC-1
Fotek SSR-25 DA Solid State Relay
Resistor 1k ohm
Simpson TP35 tie plate
8.2K Ohm thru hole resistor
1602 LCD Module
Vectorboard
Ceramic Fiber Blanket 2300F, 8# Density, 1/2" x 12" x 12"
1/32" thick 5052 aluminum tray with flange, cut to 8"x9-5/8"
J-B Weld 31314 High Temperature RTV Red
ABS Plastic Project Box
Design Engineering 050503-16 Floor and Tunnel Shield 10” x 10”
Arduino Nano R3
Max6675 Thermocouple Temperature Module
Hamilton Beach model 311-34 toaster oven
Apps and platforms
Arduino IDE
Project description
Code
reflow_oven.ino
Use this code with an Arduino Nano to control the top and bottom elements of a toaster oven for solder reflow
Downloadable files
Arduino Nano Based Reflow Oven
Arduino Nano controls the heating elements and reads a temperature sensor to create a solder reflow oven.
Arduino Nano Based Reflow Oven
Arduino Nano Based Reflow Oven
Arduino Nano controls the heating elements and reads a temperature sensor to create a solder reflow oven.
Arduino Nano Based Reflow Oven
Comments
Only logged in users can leave comments
thedalles77
0 Followers
•0 Projects
Table of contents
Intro
3
0