Automated Beer Pong Game - Moving Cups!

Drinking game too easy? Here's a way to increase the difficulty to your liking!

Nov 11, 2020

•

3853 views

•

3 respects

home automation

food and drinks

Components and supplies

Rotary Encoder with Push-Button

Stepper Motor, Mini Step

Limit Switch, 5 A

Arduino Nano R3

OLED Display, Blue on Black

Apps and platforms

Arduino IDE

Project description

Code

Code for Automated Beer Pong Game

c_cpp

This is for the game, some adjustments might have to be made if using a different motor driver (TB6600) or motor with different degrees of steps.

1/*
2 * Code by Ty Palowski for Automated Beerpong Game
3 * https://youtube.com/c/typalowski
4  */
5
6
7#include <Adafruit_GFX.h>
8#include <Adafruit_SSD1306.h>
9#include  <ClickEncoder.h>
10#include <TimerOne.h>
11
12#define SCREEN_WIDTH 128 // OLED  display width, in pixels
13#define SCREEN_HEIGHT 32 // OLED display height, in  pixels
14
15// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
16#define  OLED_RESET     4 // Reset pin # (or -1 if sharing Arduino reset pin)
17
18Adafruit_SSD1306  display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
19
20// defines pins  numbers
21const int dirPin = 2; 
22const int stepPin = 4; 
23const int enPin  = 5;
24
25int menuitem = 1;
26int frame = 1;
27int page = 1;
28int lastMenuItem  = 1;
29
30String menuItem1 = "Motor: OFF";
31String menuItem2 = "Difficulty";
32String  menuItem3 = "Mode";
33String menuItem4 = "Reset";
34
35boolean motor = true;
36int  stepdelay;
37
38int maxDelay = 240;
39int diffDelta = 22;
40
41String difficulty[10]  = { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10" };
42int  selectedDifficulty = 0;
43
44String mode[2] = { "EASY", "HARD"};
45int selectedMode  = 1;
46
47boolean up = false;
48boolean down = false;
49boolean middle = false;
50
51ClickEncoder  *encoder;
52int16_t last, value;
53
54// '85062033-beer-pong-or-beirut-drinking-game-with-cups-with-ball-line-art-vector-icon-for-apps-and-websites-',  128x32px
55const unsigned char myBitmap [] PROGMEM = {
56  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
57  0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
58  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
59  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
60  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
61  0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
62  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 
63  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
64  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,  0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
65  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
66  0x00,  0x00, 0x00, 0x00, 0x00, 0x01, 0x83, 0x83, 0x83, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
67  0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
68  0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xff, 0xff,  0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
69  0x00, 0x00, 0x00, 0x00, 0x00, 0x01,  0x98, 0x38, 0x38, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
70  0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x9f, 0xff, 0xff, 0xf3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
71  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0xc3, 0xc3, 0x33, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 
72  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x83, 0x83, 0x33,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
73  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99,  0xff, 0xff, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
74  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x99, 0x98, 0x33, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
75  0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0xf9, 0x9c, 0x71, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
76  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x39, 0x9f, 0xf1, 0x3c, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
77  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x90, 0x13,  0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
78  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x0f, 0x98, 0x13, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
79  0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x03, 0xc8, 0x23, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
80  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0x26, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 
81  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x3e, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
82  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x08, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
83  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x0e, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
84  0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
85  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
86  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
87  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
88};
89
90#define  home_switch 9 // Pin 9 connected to Home Switch (MicroSwitch)
91
92int direction;    // Variable to set Rotation (CW-CCW) of the motor
93int steps;        // Used  to set HOME position after Homing is completed
94
95int fullDist = 32766;
96int  halfDist = fullDist/2;
97
98
99void setup() {
100  Serial.begin(9600);
101
102  
103  // Sets the two pins as Outputs
104  pinMode(stepPin,OUTPUT); 
105  pinMode(dirPin,OUTPUT);
106
107  pinMode(enPin,OUTPUT);
108  digitalWrite(enPin,LOW);
109
110
111  pinMode(7,OUTPUT);
112
113  
114  encoder = new ClickEncoder(A1, A0, A2);
115  encoder->setAccelerationEnabled(false);
116
117  display.begin();      
118  display.clearDisplay(); 
119
120  Timer1.initialize(1000);
121  Timer1.attachInterrupt(timerIsr); 
122  
123  last = encoder->getValue();
124
125  display.setRotation (2);
126
127  display.drawBitmap(0, 0, myBitmap, 128, 64,  WHITE); // display.drawBitmap(x position, y position, bitmap data, bitmap width,  bitmap height, color)
128
129  // Show the display buffer on the screen. 
130  display.display();
131
132
133//  Start Homing procedure of Stepper Motor at startup
134Serial.println("Homing...");
135  while (digitalRead(home_switch)) {  // Do this until the switch is activated   
136    digitalWrite(dirPin, HIGH);      // (HIGH = anti-clockwise / LOW = clockwise)
137    digitalWrite(stepPin, HIGH);
138    delayMicroseconds(75);                       //  Delay to slow down speed of Stepper
139    digitalWrite(stepPin, LOW);
140    delayMicroseconds(75);   
141}
142
143  while (!digitalRead(home_switch)) { // Do this until the switch  is not activated
144    digitalWrite(dirPin, LOW); 
145    digitalWrite(stepPin,  HIGH);
146    delay(5);                       // More delay to slow even more while  moving away from switch
147    digitalWrite(stepPin, LOW);
148    delay(5);
149  }
150
151  steps=0;  // Reset position variable to zero
152
153    digitalWrite(dirPin,LOW);  // Enables the motor to move in a particular direction
154  // Makes 200 pulses  for making one full cycle rotation
155  for(int x = 0; x < halfDist+400; x++) {
156    digitalWrite(stepPin,HIGH); 
157    delayMicroseconds(50); 
158    digitalWrite(stepPin,LOW);  
159    delayMicroseconds(50); 
160    }
161   Serial.println("Ready!");
162  delay(1000);
163
164}
165
166void  loop() {
167
168stepdelay = maxDelay - selectedDifficulty*diffDelta;
169
170      if  (motor == true) 
171      {
172        turnMotorOff();
173        }
174      else
175      { 
176        turnMotorOn();
177       }
178
179  drawMenu();
180
181  readRotaryEncoder();
182
183   ClickEncoder::Button b = encoder->getButton();
184   if (b != ClickEncoder::Open)  {
185   switch (b) {
186      case ClickEncoder::Clicked:
187         middle=true;
188        break;
189    }
190  }    
191  
192  if (up && page == 1 ) //We have turned  the Rotary Encoder CounterClockwise
193  {
194    up = false;
195    if(menuitem==1  && frame ==2)
196    {
197      frame--;
198    }
199     if(menuitem==2 && frame  ==3)
200    {
201      frame--;
202    }
203         if(menuitem==3 && frame ==4)
204    {
205      frame--;
206    }
207    
208    lastMenuItem = menuitem;
209    menuitem--;
210    if (menuitem==0)
211    {
212      menuitem=1;
213    }
214  } 
215  else if  (up && page == 2 && menuitem==2 ) 
216  {
217    up = false;
218    selectedDifficulty--;
219    if(selectedDifficulty == -1)
220    {
221      selectedDifficulty = 9;
222    }
223  }
224  else if (up && page == 2 && menuitem==4 ) {
225    up = false;
226  }
227   else if (up && page == 2 && menuitem==3 ) {
228    up = false;
229    selectedMode--;
230    if(selectedMode == -1)
231    {
232      selectedMode = 1;
233    }
234  }
235  
236  if (down && page == 1) //We have turned the Rotary Encoder Clockwise
237  {
238
239    down = false;
240    if(menuitem==2 && lastMenuItem == 1)
241    {
242      frame ++;
243    }
244    else  if(menuitem==3 && lastMenuItem == 2)
245    {
246      frame ++;
247    }
248    else  if(menuitem==4 && lastMenuItem == 3 && frame!=3)
249    {
250      frame ++;
251    }
252    lastMenuItem = menuitem;
253    menuitem++;  
254    if (menuitem==5) 
255    {
256      menuitem--;
257    }
258  }
259   else  if (down && page == 2 && menuitem==2 ) {
260    down = false;
261    selectedDifficulty++;
262    if(selectedDifficulty == 10)
263    {
264      selectedDifficulty = 0;
265    }
266  }
267  else if (down && page == 2 && menuitem==3 ) {
268    down = false;
269    selectedMode++;
270    if(selectedMode == 2)
271    {
272      selectedMode  = 0;
273    }
274  }
275  
276  if (middle) //Middle Button is Pressed
277  {
278    middle = false;
279   
280    if (page == 1 && menuitem==1) // Motor Control  
281    {
282      if (motor) 
283      {
284        menuItem1 = "Motor: ON";
285        motor = false;
286        turnMotorOff();
287        //Left to Center
288    digitalWrite(dirPin,LOW); // Enables the motor to move in a particular direction
289  for(int x = 0; x < halfDist; x++) {
290    digitalWrite(stepPin,HIGH); 
291    delayMicroseconds(stepdelay);  
292    digitalWrite(stepPin,LOW); 
293    delayMicroseconds(stepdelay); 
294    }
295        }
296      else 
297      { 
298        menuItem1 = "Motor: OFF";
299        motor = true;
300        turnMotorOn();
301        //Center to Right
302    digitalWrite(dirPin,HIGH); // Enables the motor to move in a particular direction
303  for(int x = 0; x < halfDist; x++) {
304    digitalWrite(stepPin,HIGH); 
305    delayMicroseconds(stepdelay);  
306    digitalWrite(stepPin,LOW); 
307    delayMicroseconds(stepdelay); 
308    }
309       }
310    }
311
312    if(page == 1 && menuitem ==4)// Reset
313    {
314      resetDefaults();
315    }
316    else if (page == 1 && menuitem==2) {
317      page=2;
318     }
319    else if (page == 1 && menuitem==3) {
320      page=2;
321     }
322    else if (page == 2) 
323     {
324      page=1; 
325     }
326   }   
327  }
328  
329  void drawMenu()
330  {
331    
332  if (page==1) 
333  {    
334    display.setTextSize(1);
335    display.clearDisplay();
336    display.setTextColor(WHITE,  BLACK);
337    display.setCursor(15, 0);
338    display.print("MAIN MENU");
339    display.drawFastHLine(0,10,128,WHITE);
340
341    if(menuitem==1 && frame ==1)
342    {   
343      displayMenuItem(menuItem1, 15,true); //FRAME 1
344      displayMenuItem(menuItem2,  25,false);
345    }
346    else if(menuitem == 2 && frame == 1)
347    {
348      displayMenuItem(menuItem1,  15,false);
349      displayMenuItem(menuItem2, 25,true);
350    }
351    else if(menuitem  == 3 && frame == 2)
352    {
353      displayMenuItem(menuItem2, 15,false); //FRAME  2
354      displayMenuItem(menuItem3, 25,true);
355    }
356
357      else if(menuitem  == 2 && frame == 2)
358    {
359      displayMenuItem(menuItem2, 15,true);
360      displayMenuItem(menuItem3,  25,false);
361    }
362    else if(menuitem == 4 && frame == 3)
363    {
364      displayMenuItem(menuItem3,  15,false); //FRAME 3
365      displayMenuItem(menuItem4, 25,true);
366    }
367    
368    else if(menuitem == 3 && frame == 3)
369    {
370      displayMenuItem(menuItem3,  15,true);
371      displayMenuItem(menuItem4, 25,false);
372    }
373    else if(menuitem  == 2 && frame == 3)
374    {
375      displayMenuItem(menuItem2, 15,true);  //FRAME  2
376      displayMenuItem(menuItem3, 25,false);
377    }   
378    else if(menuitem  == 1 && frame == 2)
379    {
380      displayMenuItem(menuItem1, 15,true);  //FRAME  1
381      displayMenuItem(menuItem2, 25,false);
382    }   
383    display.display();
384  }
385  else if (page==2 && menuitem == 2) 
386  {
387   displayStringMenuPage(menuItem2,  difficulty[selectedDifficulty]);
388  }
389   else if (page==2 && menuitem == 3)  
390  {
391   displayStringMenuPage(menuItem3, mode[selectedMode]);
392  }  
393  }
394
395
396  void resetDefaults()
397  {
398    selectedDifficulty = 0;
399    selectedMode = 0;
400    motor = true;
401    menuItem1 = "Motor: OFF";//  Start Homing procedure of Stepper Motor at startup
402
403  while (digitalRead(home_switch))  {  // Do this until the switch is activated   
404    digitalWrite(dirPin, HIGH);      // (HIGH = anti-clockwise / LOW = clockwise)
405    digitalWrite(stepPin,  HIGH);
406    delayMicroseconds(75);                      // Delay to slow down  speed of Stepper
407    digitalWrite(stepPin, LOW);
408    delayMicroseconds(75);   
409}
410
411  while (!digitalRead(home_switch)) { // Do this until the switch  is not activated
412    digitalWrite(dirPin, LOW); 
413    digitalWrite(stepPin,  HIGH);
414    delay(5);                       // More delay to slow even more while  moving away from switch
415    digitalWrite(stepPin, LOW);
416    delay(5);
417  }
418
419  steps=0;  // Reset position variable to zero
420
421    digitalWrite(dirPin,LOW);  // Enables the motor to move in a particular direction
422  for(int x = 0; x < halfDist+400;  x++) {
423    digitalWrite(stepPin,HIGH); 
424    delayMicroseconds(50); 
425    digitalWrite(stepPin,LOW);  
426    delayMicroseconds(50); 
427    }
428   }
429
430  void setstepdelay()
431  {
432  //  display.setContrast(contrast);
433    display.display();
434  }
435
436  void turnMotorOn()
437  {
438//Left limit to Right Limit
439    digitalWrite(dirPin,HIGH);  
440  for(int x = 0; x < fullDist; x++) {
441    digitalWrite(stepPin,HIGH); 
442    delayMicroseconds(stepdelay); 
443    digitalWrite(stepPin,LOW); 
444    delayMicroseconds(stepdelay);  
445    }
446//Right limit to Left
447    digitalWrite(dirPin,LOW); 
448  for(int  x = 0; x < fullDist; x++) {
449    digitalWrite(stepPin,HIGH); 
450    delayMicroseconds(stepdelay);  
451    digitalWrite(stepPin,LOW); 
452    delayMicroseconds(stepdelay); 
453    }
454  }
455
456    void turnMotorOff()
457  {
458    digitalWrite(7,HIGH);
459  }
460
461  void timerIsr() {
462  encoder->service();
463}
464
465void displayIntMenuPage(String  menuItem, int value)
466{
467    display.setTextSize(1);
468    display.clearDisplay();
469    display.setTextColor(WHITE, BLACK);
470    display.setCursor(10, 0);
471    display.print(menuItem);
472    display.drawFastHLine(0,10,80,WHITE);
473    display.setCursor(5, 15);
474    display.print("Value");
475    display.setTextSize(2);
476    display.setCursor(80, 10);
477    display.print(value);
478    display.setTextSize(2);
479    display.display();
480}
481
482void displayStringMenuPage(String  menuItem, String value)
483{
484    display.setTextSize(2);
485    display.clearDisplay();
486    display.setTextColor(WHITE, BLACK);
487    display.setCursor(0, 0);
488    display.print(menuItem);
489    display.setCursor(50, 15);
490    display.print(value);
491    display.setTextSize(2);
492    display.display();
493}
494
495void displayMenuItem(String item, int position,  boolean selected)
496{
497    if(selected)
498    {
499      display.setTextColor(BLACK,  WHITE);
500    }else
501    {
502      display.setTextColor(WHITE, BLACK);
503    }
504    display.setCursor(0, position);
505    display.print(">"+item);
506}
507
508void  readRotaryEncoder()
509{
510  value += encoder->getValue();
511  
512  if (value/2  > last) {
513    last = value/2;
514    down = true;
515    delay(150);
516  }else   if (value/2 < last) {
517    last = value/2;
518    up = true;
519    delay(150);
520  }
521}

/*
 * Code by Ty Palowski for Automated Beerpong Game
 * https://youtube.com/c/typalowski
  */


#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include  <ClickEncoder.h>
#include <TimerOne.h>

#define SCREEN_WIDTH 128 // OLED  display width, in pixels
#define SCREEN_HEIGHT 32 // OLED display height, in  pixels

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
#define  OLED_RESET     4 // Reset pin # (or -1 if sharing Arduino reset pin)

Adafruit_SSD1306  display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

// defines pins  numbers
const int dirPin = 2; 
const int stepPin = 4; 
const int enPin  = 5;

int menuitem = 1;
int frame = 1;
int page = 1;
int lastMenuItem  = 1;

String menuItem1 = "Motor: OFF";
String menuItem2 = "Difficulty";
String  menuItem3 = "Mode";
String menuItem4 = "Reset";

boolean motor = true;
int  stepdelay;

int maxDelay = 240;
int diffDelta = 22;

String difficulty[10]  = { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10" };
int  selectedDifficulty = 0;

String mode[2] = { "EASY", "HARD"};
int selectedMode  = 1;

boolean up = false;
boolean down = false;
boolean middle = false;

ClickEncoder  *encoder;
int16_t last, value;

// '85062033-beer-pong-or-beirut-drinking-game-with-cups-with-ball-line-art-vector-icon-for-apps-and-websites-',  128x32px
const unsigned char myBitmap [] PROGMEM = {
  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,  0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00,  0x00, 0x00, 0x00, 0x00, 0x01, 0x83, 0x83, 0x83, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xff, 0xff,  0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x01,  0x98, 0x38, 0x38, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x9f, 0xff, 0xff, 0xf3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0xc3, 0xc3, 0x33, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x83, 0x83, 0x33,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99,  0xff, 0xff, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x99, 0x98, 0x33, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0xf9, 0x9c, 0x71, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x39, 0x9f, 0xf1, 0x3c, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x90, 0x13,  0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x0f, 0x98, 0x13, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x03, 0xc8, 0x23, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0x26, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x3e, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x08, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x0e, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

#define  home_switch 9 // Pin 9 connected to Home Switch (MicroSwitch)

int direction;    // Variable to set Rotation (CW-CCW) of the motor
int steps;        // Used  to set HOME position after Homing is completed

int fullDist = 32766;
int  halfDist = fullDist/2;


void setup() {
  Serial.begin(9600);

  
  // Sets the two pins as Outputs
  pinMode(stepPin,OUTPUT); 
  pinMode(dirPin,OUTPUT);

  pinMode(enPin,OUTPUT);
  digitalWrite(enPin,LOW);


  pinMode(7,OUTPUT);

  
  encoder = new ClickEncoder(A1, A0, A2);
  encoder->setAccelerationEnabled(false);

  display.begin();      
  display.clearDisplay(); 

  Timer1.initialize(1000);
  Timer1.attachInterrupt(timerIsr); 
  
  last = encoder->getValue();

  display.setRotation (2);

  display.drawBitmap(0, 0, myBitmap, 128, 64,  WHITE); // display.drawBitmap(x position, y position, bitmap data, bitmap width,  bitmap height, color)

  // Show the display buffer on the screen. 
  display.display();


//  Start Homing procedure of Stepper Motor at startup
Serial.println("Homing...");
  while (digitalRead(home_switch)) {  // Do this until the switch is activated   
    digitalWrite(dirPin, HIGH);      // (HIGH = anti-clockwise / LOW = clockwise)
    digitalWrite(stepPin, HIGH);
    delayMicroseconds(75);                       //  Delay to slow down speed of Stepper
    digitalWrite(stepPin, LOW);
    delayMicroseconds(75);   
}

  while (!digitalRead(home_switch)) { // Do this until the switch  is not activated
    digitalWrite(dirPin, LOW); 
    digitalWrite(stepPin,  HIGH);
    delay(5);                       // More delay to slow even more while  moving away from switch
    digitalWrite(stepPin, LOW);
    delay(5);
  }

  steps=0;  // Reset position variable to zero

    digitalWrite(dirPin,LOW);  // Enables the motor to move in a particular direction
  // Makes 200 pulses  for making one full cycle rotation
  for(int x = 0; x < halfDist+400; x++) {
    digitalWrite(stepPin,HIGH); 
    delayMicroseconds(50); 
    digitalWrite(stepPin,LOW);  
    delayMicroseconds(50); 
    }
   Serial.println("Ready!");
  delay(1000);

}

void  loop() {

stepdelay = maxDelay - selectedDifficulty*diffDelta;

      if  (motor == true) 
      {
        turnMotorOff();
        }
      else
      { 
        turnMotorOn();
       }

  drawMenu();

  readRotaryEncoder();

   ClickEncoder::Button b = encoder->getButton();
   if (b != ClickEncoder::Open)  {
   switch (b) {
      case ClickEncoder::Clicked:
         middle=true;
        break;
    }
  }    
  
  if (up && page == 1 ) //We have turned  the Rotary Encoder CounterClockwise
  {
    up = false;
    if(menuitem==1  && frame ==2)
    {
      frame--;
    }
     if(menuitem==2 && frame  ==3)
    {
      frame--;
    }
         if(menuitem==3 && frame ==4)
    {
      frame--;
    }
    
    lastMenuItem = menuitem;
    menuitem--;
    if (menuitem==0)
    {
      menuitem=1;
    }
  } 
  else if  (up && page == 2 && menuitem==2 ) 
  {
    up = false;
    selectedDifficulty--;
    if(selectedDifficulty == -1)
    {
      selectedDifficulty = 9;
    }
  }
  else if (up && page == 2 && menuitem==4 ) {
    up = false;
  }
   else if (up && page == 2 && menuitem==3 ) {
    up = false;
    selectedMode--;
    if(selectedMode == -1)
    {
      selectedMode = 1;
    }
  }
  
  if (down && page == 1) //We have turned the Rotary Encoder Clockwise
  {

    down = false;
    if(menuitem==2 && lastMenuItem == 1)
    {
      frame ++;
    }
    else  if(menuitem==3 && lastMenuItem == 2)
    {
      frame ++;
    }
    else  if(menuitem==4 && lastMenuItem == 3 && frame!=3)
    {
      frame ++;
    }
    lastMenuItem = menuitem;
    menuitem++;  
    if (menuitem==5) 
    {
      menuitem--;
    }
  }
   else  if (down && page == 2 && menuitem==2 ) {
    down = false;
    selectedDifficulty++;
    if(selectedDifficulty == 10)
    {
      selectedDifficulty = 0;
    }
  }
  else if (down && page == 2 && menuitem==3 ) {
    down = false;
    selectedMode++;
    if(selectedMode == 2)
    {
      selectedMode  = 0;
    }
  }
  
  if (middle) //Middle Button is Pressed
  {
    middle = false;
   
    if (page == 1 && menuitem==1) // Motor Control  
    {
      if (motor) 
      {
        menuItem1 = "Motor: ON";
        motor = false;
        turnMotorOff();
        //Left to Center
    digitalWrite(dirPin,LOW); // Enables the motor to move in a particular direction
  for(int x = 0; x < halfDist; x++) {
    digitalWrite(stepPin,HIGH); 
    delayMicroseconds(stepdelay);  
    digitalWrite(stepPin,LOW); 
    delayMicroseconds(stepdelay); 
    }
        }
      else 
      { 
        menuItem1 = "Motor: OFF";
        motor = true;
        turnMotorOn();
        //Center to Right
    digitalWrite(dirPin,HIGH); // Enables the motor to move in a particular direction
  for(int x = 0; x < halfDist; x++) {
    digitalWrite(stepPin,HIGH); 
    delayMicroseconds(stepdelay);  
    digitalWrite(stepPin,LOW); 
    delayMicroseconds(stepdelay); 
    }
       }
    }

    if(page == 1 && menuitem ==4)// Reset
    {
      resetDefaults();
    }
    else if (page == 1 && menuitem==2) {
      page=2;
     }
    else if (page == 1 && menuitem==3) {
      page=2;
     }
    else if (page == 2) 
     {
      page=1; 
     }
   }   
  }
  
  void drawMenu()
  {
    
  if (page==1) 
  {    
    display.setTextSize(1);
    display.clearDisplay();
    display.setTextColor(WHITE,  BLACK);
    display.setCursor(15, 0);
    display.print("MAIN MENU");
    display.drawFastHLine(0,10,128,WHITE);

    if(menuitem==1 && frame ==1)
    {   
      displayMenuItem(menuItem1, 15,true); //FRAME 1
      displayMenuItem(menuItem2,  25,false);
    }
    else if(menuitem == 2 && frame == 1)
    {
      displayMenuItem(menuItem1,  15,false);
      displayMenuItem(menuItem2, 25,true);
    }
    else if(menuitem  == 3 && frame == 2)
    {
      displayMenuItem(menuItem2, 15,false); //FRAME  2
      displayMenuItem(menuItem3, 25,true);
    }

      else if(menuitem  == 2 && frame == 2)
    {
      displayMenuItem(menuItem2, 15,true);
      displayMenuItem(menuItem3,  25,false);
    }
    else if(menuitem == 4 && frame == 3)
    {
      displayMenuItem(menuItem3,  15,false); //FRAME 3
      displayMenuItem(menuItem4, 25,true);
    }
    
    else if(menuitem == 3 && frame == 3)
    {
      displayMenuItem(menuItem3,  15,true);
      displayMenuItem(menuItem4, 25,false);
    }
    else if(menuitem  == 2 && frame == 3)
    {
      displayMenuItem(menuItem2, 15,true);  //FRAME  2
      displayMenuItem(menuItem3, 25,false);
    }   
    else if(menuitem  == 1 && frame == 2)
    {
      displayMenuItem(menuItem1, 15,true);  //FRAME  1
      displayMenuItem(menuItem2, 25,false);
    }   
    display.display();
  }
  else if (page==2 && menuitem == 2) 
  {
   displayStringMenuPage(menuItem2,  difficulty[selectedDifficulty]);
  }
   else if (page==2 && menuitem == 3)  
  {
   displayStringMenuPage(menuItem3, mode[selectedMode]);
  }  
  }


  void resetDefaults()
  {
    selectedDifficulty = 0;
    selectedMode = 0;
    motor = true;
    menuItem1 = "Motor: OFF";//  Start Homing procedure of Stepper Motor at startup

  while (digitalRead(home_switch))  {  // Do this until the switch is activated   
    digitalWrite(dirPin, HIGH);      // (HIGH = anti-clockwise / LOW = clockwise)
    digitalWrite(stepPin,  HIGH);
    delayMicroseconds(75);                      // Delay to slow down  speed of Stepper
    digitalWrite(stepPin, LOW);
    delayMicroseconds(75);   
}

  while (!digitalRead(home_switch)) { // Do this until the switch  is not activated
    digitalWrite(dirPin, LOW); 
    digitalWrite(stepPin,  HIGH);
    delay(5);                       // More delay to slow even more while  moving away from switch
    digitalWrite(stepPin, LOW);
    delay(5);
  }

  steps=0;  // Reset position variable to zero

    digitalWrite(dirPin,LOW);  // Enables the motor to move in a particular direction
  for(int x = 0; x < halfDist+400;  x++) {
    digitalWrite(stepPin,HIGH); 
    delayMicroseconds(50); 
    digitalWrite(stepPin,LOW);  
    delayMicroseconds(50); 
    }
   }

  void setstepdelay()
  {
  //  display.setContrast(contrast);
    display.display();
  }

  void turnMotorOn()
  {
//Left limit to Right Limit
    digitalWrite(dirPin,HIGH);  
  for(int x = 0; x < fullDist; x++) {
    digitalWrite(stepPin,HIGH); 
    delayMicroseconds(stepdelay); 
    digitalWrite(stepPin,LOW); 
    delayMicroseconds(stepdelay);  
    }
//Right limit to Left
    digitalWrite(dirPin,LOW); 
  for(int  x = 0; x < fullDist; x++) {
    digitalWrite(stepPin,HIGH); 
    delayMicroseconds(stepdelay);  
    digitalWrite(stepPin,LOW); 
    delayMicroseconds(stepdelay); 
    }
  }

    void turnMotorOff()
  {
    digitalWrite(7,HIGH);
  }

  void timerIsr() {
  encoder->service();
}

void displayIntMenuPage(String  menuItem, int value)
{
    display.setTextSize(1);
    display.clearDisplay();
    display.setTextColor(WHITE, BLACK);
    display.setCursor(10, 0);
    display.print(menuItem);
    display.drawFastHLine(0,10,80,WHITE);
    display.setCursor(5, 15);
    display.print("Value");
    display.setTextSize(2);
    display.setCursor(80, 10);
    display.print(value);
    display.setTextSize(2);
    display.display();
}

void displayStringMenuPage(String  menuItem, String value)
{
    display.setTextSize(2);
    display.clearDisplay();
    display.setTextColor(WHITE, BLACK);
    display.setCursor(0, 0);
    display.print(menuItem);
    display.setCursor(50, 15);
    display.print(value);
    display.setTextSize(2);
    display.display();
}

void displayMenuItem(String item, int position,  boolean selected)
{
    if(selected)
    {
      display.setTextColor(BLACK,  WHITE);
    }else
    {
      display.setTextColor(WHITE, BLACK);
    }
    display.setCursor(0, position);
    display.print(">"+item);
}

void  readRotaryEncoder()
{
  value += encoder->getValue();
  
  if (value/2  > last) {
    last = value/2;
    down = true;
    delay(150);
  }else   if (value/2 < last) {
    last = value/2;
    up = true;
    delay(150);
  }
}

Downloadable files

Wiring Schedule for Components

Works with Arduino Uno and Nano. Needs 12V supply and 5V to power motor driver and Arduino, respectively.

Wiring Schedule for Components

Works with Arduino Uno and Nano. Needs 12V supply and 5V to power motor driver and Arduino, respectively.

Wiring Schedule for Components

Documentation

Magnet Shuttle

Magnet shuttle which fits ontop of AL202 Slider

Magnet Shuttle

Stepper Motor Holder

Holds stepper motor and AL2020 rail.

Stepper Motor Holder

Magnet Shuttle

Magnet shuttle which fits ontop of AL202 Slider

Magnet Shuttle

Stepper Motor Holder

Holds stepper motor and AL2020 rail.

Stepper Motor Holder

Limit Switch Holder

Holds limit switch and AL2020 Rail

Limit Switch Holder

Holds limit switch and AL2020 Rail

Limit Switch Holder

Comments

Only logged in users can leave comments

typalowski

0 Followers

•

0 Projects

Intro