Everything you need to know to use μFire's EC Probe Interface to take an EC measurement.
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
Project tutorial by uFire
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
Project tutorial by Dmitrii ALBOT
IoT Enabled Hydroponic Farm
Project in progress by Paul Langdon
Log humidity, automatic irrigate, switch plant growing lamp on and voice control everything with Amazon Alexa and Arduino.
Project tutorial by Walter Heger
Sorry about the confusion, there are a handful of ways to describe these wires. In my description, a Qwiic to Male wire is a wire that has a qwiic connector and a male header. A Qwiic to Female would be connect to a qwiic connector on one side, and a female header on the other.
Other places refer to them using other names and terms which makes it hard to pick a common naming method.
Yes, you could add one. I have other projects here that use an e-ink display, https://www.hackster.io/uFire/helium-water-quality-monitor-075e6d. The connections are code are fairly simple.
Hello, yes the change would be fairly easy to make. There are other uFire projects here on Hackster that do almost exactly what you mentioned.
Or connect with your social account:
New here? Create an account