Plegusanko

Project in progress by Plegusanko

  • 61 views
  • 0 comments
  • 0 respects

Benchmarking of temperature sensors for Arduino

Project tutorial by Jean Noël

  • 4,334 views
  • 0 comments
  • 3 respects

Face-Masks Disinfection Device — needlab

Project tutorial by Team NeedLab

  • 45,369 views
  • 46 comments
  • 89 respects

Toolbox 3


Safe Distance Protection Badge

Project tutorial by filipmu

  • 13,840 views
  • 4 comments
  • 39 respects

Touchless faucet with door control system for COVID-19

Project tutorial by Rucksikaa Raajkumar

  • 20,793 views
  • 20 comments
  • 47 respects

  • Face-Masks Disinfection Device — needlab almost 2 years ago

    Yes, we are targetting FFP2 and N95 at the first place. Studies shown that UV-C and dry heat at 70°C will preserve the electret, at least for few disinfection cycles. On our side we want to keep it as a "KISS" (keep it stupid simple) solution. Your project with refill the static charge on masks after disinfecting sounds very interesting and relevant. Thanks for sharing.

  • Face-Masks Disinfection Device — needlab about 2 years ago

    Helpful for the V2: N95 Decontamination & Reuse Webinar | N95DECON & MGB
    https://youtu.be/MxOFxoSMNL8

  • Face-Masks Disinfection Device — needlab about 2 years ago

    Merci. N'hésitez pas à me tenir informé de votre projet. Je vous envoie des informations issues de ma veille technologique sur l'emploi des UV-C qui pourront vous être utilise via Linkedin

Add projectSign up / Login