Using IMUs is one of the most struggling part of every Arduino lovers here a simple solution.
Project tutorial by Vincenzo G.
Do you need a smaller board than Arduino Nano or Micro? I show you my experiment to make a minimal development board with SMD components.
by Vincenzo G.
Wondering which is the thrust of your brushless motors? Do you want to check the current absorption? Build your cheap thrust station!
A time switching battery powered solar charged circuit, used to power an Arduino Uno and some peripherals.
Project in progress by Igor Fonseca Albuquerque
sorry Andrew but i don't use hackster very often. Anyway i wrote "It will work with every Arduino board like as nano, micro , due, ecc" so yes it will work both on nano and on esp8266
Hi sean, sorry but i don't use hackster very often, the changes you want to do are possibles but require a lot of work, really a lot, you may be better looking at other alternatives. Anyway if you really want you I can help you, you can open an issue on github and we will talk there
Hi jeremy, sorry i missed this comment 😔
Try to decrease the number of samples in the arduino sketch, this should do the work
Also try to chech with a voltmeter the ic that you are testing!
Or connect with your social account:
New here? Create an account