Development Board for ATtiny MCU © GPL3+

Do you need a smaller board than Arduino Nano or Micro? I show you my experiment to make a minimal development board with SMD components.

  • 1,033 views
  • 0 comments
  • 14 respects

Components and supplies

About this project

I was working on a small project were I needed a small MCU to accomplish some simple task so I thought to make a small development board for an Attiny84 or Attiny841.

Here a video of the first sketch, obviously the Blink, running on my board:

It has both Serial and ISP pins:

For the schematics I followed the circuit of Nick Gammon (one of the author of the Arduino Project) here the link to his blog.

To make the board I chose the well know PCBWay, click here is you want to order some!!

About the core I am using both AtTiny Core from DrAzzy but it lacks of the serial bootloader which this other core from Sleemanj has. Maybe I will make another board for the AtTiny167 which is a 20pin!

EDIT: i did ;)

Comments

Similar projects you might like

Music Adaptive RGB LED with Arduino and Processing

Project in progress by ounane mohamed elfarouk

  • 553 views
  • 4 comments
  • 7 respects

Cellular IoT with Blynk & Hologram

by Moheeb Zara

  • 4,159 views
  • 9 comments
  • 12 respects

Step Sequencer

Project tutorial by costantinorizzuti

  • 722 views
  • 0 comments
  • 5 respects

Voice Controlled Rover

Project tutorial by Brink.IO

  • 472 views
  • 0 comments
  • 5 respects

WormGear Mechanism Test

Project tutorial by Brijesh Singh

  • 1,202 views
  • 3 comments
  • 4 respects

Add Remote Control to Your Lamp

Project tutorial by littlelab

  • 499 views
  • 0 comments
  • 3 respects
Add projectSign up / Login