Arduino Giga Watch Using Addressable LED

A Giga watch that can show the time and show sound the level in the room. The clock automaticallyturns off when the room gets dark.

Aug 25, 2022

3712 views

4 respects

Components and supplies

1

Resistor 10k ohm

1

Tactile Switch, Top Actuated

1

Photo resistor

1

WS2812B Digital RGB LED Flexi-Strip 144 LED - 1 Meter

1

IoT Training Controller Light Sound Sensor Action

1

Arduino Nano R3

1

Real Time Clock (RTC)

Tools and machines

1

Soldering iron (generic)

1

Solder Wire, Lead Free

1

3D Printer (generic)

Project description

Code

ClockAndParty

c_cpp

This is the code that makes it all work toghter. This could be uptimized but it works.

ClockAndParty

c_cpp

This is the code that makes it all work toghter. This could be uptimized but it works.

Downloadable files

Arduino clock connections

This Is how I connected every component. Note That the Microphone should be able to output analog signal. Agian I used "sound sensor module" can be found on google or in most arduino starter kits. The 3 Pins that are connected to D7 and the battery, is the LED strip.

Arduino clock connections

Comments

Only logged in users can leave comments

vpaw1

0 Followers

0 Projects

Table of contents

Intro

4

0