A very simple but useful device for your lab.
Project tutorial by Mirko Pavleski
This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.
Project tutorial by Sandeep Sharma
I just levitated small objects using ultrasonic waves
Project tutorial by edison science corner
A 2-in-1 CNC machine with a rotary tool and a laser module. Project is Moved to arnabkumardas.com/diy-project/cnc-router-laser-engraver/
Project showcase by Arnab Kumar Das
This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.
Project tutorial by Amit Nandi (BigWiz)
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by DIY GUY Chris
The making of a large 3D printer (400x400x400 mm) for a college project.
Project tutorial by Desi Engineer
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Use an Arduino, two small servo motors with light sensing photo resistors to steer a solar panel towards the sun. UPDATED
Project tutorial by scott mangiacotti
This is a simple square-wave generator that basically uses the TimerOne library allow you to generate a PWM signal at pin 9.
A simple Electromagnetic Field Detector.
Project showcase by justin1445
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
Open hardware/software test bench for solar tracker with virtual instrumentation.
Project tutorial by Saad Motahhir and Aboubakr_El Hammoumi
FREE and open source Arduino Due Telescope GOTO.
Project tutorial by dEskoG
A clock, controlled by a RTC module, that you can see on a 4-digit display.
This project shows how to control devices from anywhere using web-based joystick on smartphone.
Project tutorial by IoT_lover
The cheapest micro soldering station in the world, using a cheap USB soldering iron.
Project tutorial by Paulo Bruckmann
Arduino stopwatch and lap timer with excelent accuracy and responsiveness!
Project showcase by LAGSILVA
A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
Never miss anyone at your door! A system that notifies your phone and email whenever someone presses the doorbell.
Project showcase by Kaustubh Agarwal
Do you want to tighten your security? Want to know who is entering your room and capture their picture with an old smartphone and Arduino?
Project tutorial by Walid Mafuj
Using a phone as a makeshift GSM module.
Project tutorial by Dante Roumega
A simple to build clock with many features.
A digital clock using minimum components.
Project showcase by garysat
Small size code and simple hardware. Improved version now available.
Project tutorial by M.V.P.
Generates maps based on distance between itself and obstacles autonomously and provides visual feedback.
Project tutorial by Satyavrat Wagle
Arbitrary waves can be drawn, edited, saved, opened and uploaded to the Due via USB, or the Due can run alone controlled by pots & switches.
Project tutorial by BruceEvans
Arduino Nano 32x8 LED matrix displaying date, time, temperature and humidity with a motion sensor.
Project showcase by ericBcreator
Sending Bytes to an 8x8 LED Matrix.
Writing in a 4 digit 7 segment LED display.
Want to display text? Here is your component!
Improved version of the soldering iron controller for Hakko 907 iron.
To simplify building the controller, LCD screen is implemented.
Project tutorial by Alexander
A stereo VU meter built with an Arduino Nano and two NeoPixel LED rings.
This project describes how to use an I2C DAC and an Arduino Uno to make a sinewave.
Or connect with your social account:
New here? Create an account