Project tutorial
Smart Selfie Stick

Smart Selfie Stick © Apache-2.0

Add more Fun and Energy for Selfie Stick by controlling Capture with voice level and post it automatically on tweeter .

  • 2,242 views
  • 0 comments
  • 7 respects

Components and supplies

selfie stick
Any Cheap kind , does not contain any additions
×1
Screen shot 2019 03 20 at 2 38 27 pm fqndazqcx1
1Sheeld
Basically, 1Sheeld consists of two parts. The first part is a shield that is physically connected to your Arduino board and acts as a wireless middle-man, piping data between Arduino and any Android smartphone via Bluetooth. The second part is a software platform and app on Android smartphones that manages the communication between our shield and your smartphone and let your choose between different available shields.
×1
A000066 iso both
Arduino UNO & Genuino UNO
You can use any other model compatible with 1Sheeld
×1

About this project

Code

Smart selfie stickC/C++
By using this example, you can controlling camera Capture with voice level if the
smartphone's mic reports a certain noise level and Post the picture on Twitter.
/*

Mic , Camera and twitter Shield 

This example shows an application on 1Sheeld's mic shield  control camera and Twitter shield.

By using this example, you can controlling camera Capture with  voice level  if the
smartphone's mic reports a certain noise level and Post the picture on Twitter.

*/

/* Include 1Sheeld library. */
#include <OneSheeld.h>



void setup()
{
	/* Start communication. */
	OneSheeld.begin();
	
}

void loop ()
{
	/* Always check the noise level. */
	if(Mic.getValue() > 80)
	{
		/* Turn on the camera flash. */
    Camera.setFlash(ON);
    /* Take the picture. */
    Camera.rearCapture();
    /* Wait for 10 seconds. */
    OneSheeld.delay(10000);
    /* Post the picture on Twitter. */
    Twitter.tweetLastPicture("Posted by @1Sheeld");
	}
	
}
Untitled fileArduino
/*

Mic and Camera Shield Example

This example shows an application on 1Sheeld's mic shield  control camera and Twitter shield.

By using this example, you can controlling camera Capturer with  voice level  if the
smartphone's mic reports a certain noise level and Post the picture on Twitter.

*/

/* Include 1Sheeld library. */
#include <OneSheeld.h>



void setup()
{
	/* Start communication. */
	OneSheeld.begin();
	
}

void loop ()
{
	/* Always check the noise level. */
	if(Mic.getValue() > 80)
	{
		/* Turn on the camera flash. */
    Camera.setFlash(ON);
    /* Take the picture. */
    Camera.rearCapture();
    /* Wait for 10 seconds. */
    OneSheeld.delay(10000);
    /* Post the picture on Twitter. */
    Twitter.tweetLastPicture("Posted by @1Sheeld");
	}
	
}
Smart selfie stick
This example shows an application on 1Sheeld's mic shield control camera and Twitter shield. By using this example, you can controlling camera Capturer with voice level if the smartphone's mic reports a certain noise level and Post the picture on Twitter.

Schematics

Components to make your own smart selfie stick
simple and uncomplicated ,it does not require any wiring or additional electronic components !
1%20sheeld

Comments

Similar projects you might like

Voice Assistant Using A Smart Phone And 1Sheeld

Project tutorial by Oguz Salar

  • 1,531 views
  • 0 comments
  • 5 respects

Control your Light System Using Smart Phone

Project tutorial by Ahmed Yassin

  • 35,998 views
  • 4 comments
  • 60 respects

smart robot

Project in progress by Team Arduino Arab

  • 3,174 views
  • 1 comment
  • 9 respects

Bluetooth Steering wheel for a robot using 1Sheeld

Project tutorial by Kristian Blåsol

  • 2,633 views
  • 1 comment
  • 13 respects

Smart storage drawer

Project tutorial by Mrehan Elshehawy

  • 2,081 views
  • 1 comment
  • 6 respects

Blind Stick Navigator

Project tutorial by Team MeRo

  • 10,219 views
  • 6 comments
  • 23 respects
Add projectSign up / Login