An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
Very basic obstacle avoidance robot that I used to introduce my 9 yo nephew and 7 yo niece to robotics...
An electronic sun-dancing sun tracker.
Project tutorial by SURYATEJA
This is a project that will show you how to create a Wi-Fi controlled RC Car that will recharge wirelessly while it is parked.
Project tutorial by Ioannis Kydonis
Intel Arduino 101-based tank using Bluetooth Low Energy to communicate with a Blynk remote control on your phone.
Project tutorial by Johnathan Hottell
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Project tutorial by Boian Mitov
Robot arms are awesome! In this tutorial we explore how to control one of them using a Nunchuk and an Arduino Mega.
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
This project will show you how to make a laser turret.
Project tutorial by MisterBotBreak
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Vishal soni
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Garry Gerwer and Ahmed Hamdy
The electronics for a simple camera slider, keeping it simple so it can be used with an ATTiny85.
Project tutorial by Ian Cumming
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
Use three stepper motors to make the classic analog clock movement in the opposite direction.
Project tutorial by scott mangiacotti
Or connect with your social account:
New here? Create an account