Discover a line
by Ingo Lohs
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
Project tutorial by Marius Dima
In this tutorial, you’ll learn how to use the BMP180 sensor, which is one of the most commonly used sensors for measuring the pressure.
In this tutorial, you’ll learn about the TCS230 sensor and how to use it with Arduino to recognize colors.
Brainium Bridge Baby Monitor for predictive maintenance in bridges.
Project tutorial by Alejandro Sanchez and Victor Altamirano
Project tutorial by Techatronic
This is a simple and fun project with pocket friendly budget.
Project tutorial by dnbakshi07
This project will show you how to make a probe using a datalogging Arduino shield, some sensors and an RTC.
Project tutorial by MisterBotBreak
Use the IO Expander and accessories to connect OLED screens and I2C sensors over a 100ft away.
Project tutorial by Christian
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
by Omron Electronic Components LLC
Replicate a 3D environment in real-time!
Project showcase by Travis Ledo
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
Project tutorial by Pedro52
Project stabilometric platform made with Arduino. Stabilometric platform can be used for medical rehabilitation and games.
Very simple air quality monitor with nice processing graphical interface oh PC monitor.
Project tutorial by Mirko Pavleski
In this project I show how to build a particles detector with data display, data backup on SD card and IoT with Android application.
The values of t° sensors DS18B20, waterproofed DS18B20, AM2302 will be compared with micro:bit temperature sensor and standard thermometer.
Project tutorial by Diana Khalipina
Nice looking weather station based on BMP180 and DHT11 sensor boards.
Improve reliability of measurements using PPD42NS sensor using modular 3D printed solution which includes exclosure box for sensor.
Don’t you wish your plants would tell you when they needed to be watered? Take your project from breadboard to PCB with this fun tutorial.
Project tutorial by Patchr
Lets talk about this Sharp Distance Sensor
Measure the dew point and humidity with an Arduino-based Chilled Mirror Hygrometer.
Project tutorial by schouten_tjeerd
Add extra layer of security to your ATM machine transactions with biometric fingerprint and OTP SMS.
Project tutorial by Brijesh Singh
Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Tejas Shah
Or connect with your social account:
New here? Create an account